Related papers: High Efficiency, Low Cost, RF Sources for Accelera…
This paper describes two research projects that develop new low-cost techniques for testing devices with multiple high-speed (2 to 5 Gbps) signals. Each project uses commercially available components to keep costs low, yet achieves…
The two-frequency heating technique was studied to increase the beam intensities of highly charged ions provided by the high-voltage extraction configuration (HEC) ion source at the National Institute of Radiological Sciences (NIRS). The…
A simplified analytical model of the resonant interaction of the beam of Larmor electrons drifting in the crossed constant fields of a magnetron with a synchronous wave providing a phase grouping of the drifting charge was developed to…
Analyze of experimental results shows that the energy discharge efficiency of the modern modulators is 0.92-0.93. The energy transfer efficiency can be reached up to 0.7 for 1.5 usec pulse width and up to 0.8 for 3.0 usec accordingly. The…
Since the first vacuum tube (X-ray tube) was invented by Wilhelm R\"ontgen in Germany, after more than one hundred years of development, the average power density of the vacuum tube microwave source has reached the order of 108 [MW][GHz]2.…
We report a broadband RF channelizer based on an integrated optical frequency Kerr micro-comb source, with an RF channelizing bandwidth of 90 GHz, a high RF spectral slice resolution of 1.04 GHz, and experimentally verify the RF performance…
The low-level RF system (LLRF) generates the drive sent to the high-power equipment. In synchrotrons, it uses signals from beam pick-ups (radial and longitudinal) to minimize the beam losses and provide a beam with reproducible parameters…
Radio frequency (RF) chain circuits play a major role in digital receiver architectures, allowing passband communication signals to be processed in baseband. When operating at high frequencies, these circuits tend to be costly. This…
RF electronics deals with the generation, acquisition and manipulation of high-frequency signals. In particle accelerators signals of this kind are abundant, especially in the RF and beam diagnostics systems. In modern machines the…
We design and implement a low-impedance, high-current radio-frequency (RF) circuit, enabling fast coherent coupling between magnetic levels in cold alkali atomic samples. It is based on a compact shape-optimized coil that maximizes the RF…
A muon storage ring neutrino source uses an induction linac for muon capture, a 200 MHz copper cavity system for cooling, and 200 and 400 MHz superconducting rf systems for acceleration to a final energy of up to 50 GeV. These systems and…
Optical frequency combs are broadband sources that offer mutually-coherent, equidistant spectral lines with unprecedented precision in frequency and timing for an array of applications. Kerr frequency combs in microresonators require a…
This chapter describes the basic principles, design features and characteristics of microwave discharge ion sources. A suitable source for the production of intense beams for high-power accelerators must satisfy the requirements of high…
To increase the power level and energy utilization rate of injection-locked magnetron sources, a dual way 1-kW S-band magnetron microwave power combining system with high combining efficiency was proposed and validated. A waveguide…
Long pulse modulators are used to produce high-voltage, high-power pulses with durations of several hundred microseconds up to some milliseconds. The loads are one or more klystrons for producing RF power to accelerate the particle beam in…
High-power multi-beam klystrons represent a key component to amplify RF to generate the accelerating field of the superconducting radio frequency (SRF) cavities at European XFEL. Exchanging these high-power components takes time and effort,…
Klystrons capable of 75 MW output power at 11.4 GHz have been under development at SLAC for the last decade. The work has been part of the program to realize all the components necessary for the construction of the Next Linear Collider…
Locating the sources of forced low-frequency oscillations in power systems is an important problem. A number of proposed methods demonstrate their practical usefulness, but many of them rely on strong modeling assumptions and provide poor…
Recent developments demonstrate that parametric four-wave mixing (FWM) in high-Q microresonators is a highly promising and effective approach for optical frequency comb generation, with applications including spectroscopy, optical clocks,…
We present a high efficiency source of picosecond pulses derived from a dual cavity optical frequency comb generator. This approach overcomes the limitations of single cavity comb generators that are restricted to efficiencies of a few…