Related papers: Quasi-solid-state electrolyte for ultra-high safet…
For being used as an electrolyte in All Solid State Batteries (ASSB), a solid electrolyte must possess ionic conductivity comparable to that of conventional liquid electrolytes. To achieve this conductivity range, the series…
Lithium metal batteries (LMBs), when coupled with a localized high-concentration electrolyte and a high-voltage nickel-rich cathode, offer a solution to the increasing demand for high energy density and long cycle life. However, the…
Next-generation high-efficiency Li-ion batteries require an electrolyte that is both safe and thermally stable. A possible choice for high performance all-solid-state Li-ion batteries is a liquid crystal, which possesses properties…
Ether-based electrolytes exhibit excellent compatibility with Li metal anodes, but their instability at high voltages limits their use in high-voltage Li metal batteries. To address this issue, we introduce an alternative perfluorobutane…
In this study, we address the challenge of electrolyte degradation in all-solid-state humidified Li-$O_2$ batteries, which offer high theoretical energy density and potential cost advantages over conventional lithium-ion batteries.…
We have demonstrated a fiber lithium ion battery (LIB) fabricated by co-twisting a LiFePO4 composite-coated copper wire (cathode) together with an aluminum wire (anode). An all-solid LiPF6 composite layer functioning both as the electrolyte…
Solid state battery technology has recently garnered considerable interest from companies including Toyota, BMW, Dyson, and others. The primary driver behind the commercialization of solid state batteries (SSBs) is to enable the use of…
Several active areas of research in novel energy storage technologies, including three-dimensional solid state batteries and passivation coatings for reactive battery electrode components, require conformal solid state electrolytes. We…
Recently, dinitriles (NC(CH2)nCN) and especially adiponitrile (ADN, n=4) have attracted the attention as secure electrolyte solvents due to their chemical stability, high boiling points, high flash points and low vapor pressure. The good…
Thin film solid state lithium-based batteries (TSSBs) are increasingly attractive for their intrinsic safety due to the use of a nonflammable solid electrolyte, cycling stability, and ability to be easily patterned in small form factors.…
All solid state batteries are claimed to be the next-generation battery system, in view of their safety accompanied by high energy densities. A new advanced, multiscale compatible, and fully three dimensional model for solid electrolytes is…
The electrolytes used in Lithium Ion Batteries (LIBs) such as LiBF4, LiPF6 etc. are Li-salts of some complex anions, BF4-, PF6- etc. The investigation shows that the vertical detachment energy (VDE) of these anions exceeds to that of…
A full lithium-ion-sulfur cell with a remarkable cycle life was achieved by combining an environmentally sustainable biomass-derived sulfur-carbon cathode and a pre-lithiated silicon oxide anode. X-ray diffraction, Raman spectroscopy,…
Silicon anodes offer high energy densities for next-generation lithium-ion batteries; however, their application is limited by severe volume expansion during cycling. Making silicon porous or nanostructured mitigates this expansion but…
All-solid-state batteries are expected to enable batteries with high energy density with the use of lithium metal anodes. Although solid electrolytes are believed to be mechanically strong enough to prevent lithium dendrites from…
Spinel-type LiNi0.5Mn1.5O4 (LNMO) is one of the most promising 5 V-class cathode materials for Li-ion batteries that can achieve high energy density and low production costs. However, in liquid electrolyte cells, the high voltage causes…
Solid-state lithium batteries have attracted considerable attention due to their potential to provide improved safety and higher energy density compared with conventional liquid electrolyte batteries. However, the stability of the interface…
Solid-state batteries (SSB) are emerging as next-generation electrochemical energy storage devices. Achieving high energy density in SSB relies on solid polymer electrolytes (SPE) that are electrochemically stable against both lithium metal…
Solid-state electrolytes have the potential to stabilize lithium metal anodes, which hold the promise to increase the energy density of lithium-ion batteries. However, lithium metal dendrites that occur locally at the solid-solid interface…
Lithium thiophosphates (LPS) with the composition (Li$_2$S)$_x$(P$_2$S$_5$)$_{1-x}$ are among the most promising prospective electrolyte materials for solid-state batteries (SSBs), owing to their superionic conductivity at room temperature…