Related papers: Closed-Loop MOEMS Accelerometer
We present our the construction of an atom interferometer for inertial sensing in microgravity, as part of the I.C.E. (\textit{Interf\'{e}rom\'{e}trie Coh\'{e}rente pour l'Espace}) collaboration. On-board laser systems have been developed…
Accurate wavelength calibration is an important factor for any measurement with high resolution spectrographs. Stellar spectrum comprises of discrete absorption or emission lines whose position is precisely determined by calibrating the…
In recent decades, microelectromechanical systems (MEMS)-based gyroscopes have been employed to meet positioning and navigation demands of a plethora of commercially available devices. Most of such gyroscopes rely on electrostatic actuators…
We demonstrate a self-referenced fiber frequency comb that can operate outside the well-controlled optical laboratory. The frequency comb has residual optical linewidths of < 1 Hz, sub-radian residual optical phase noise, and residual…
We present a compact, fibre-coupled interferometer with high sensitivity and a large working range. We propose to use this interferometer as a readout mechanism for future inertial sensors, removing a major limiting noise source, and in…
We are developing an imaging polarimeter by combining a fine-pixel CMOS image sensor with a coded aperture mask as part of the cipher project, aiming to achieve X-ray polarimetry in the energy range of…
Inertial sensors based on micro-electromechanical systems (MEMS) technology, such as accelerometers and angular rate sensors, are cost-effective solutions used in inertial navigation systems in a broad spectrum of applications that estimate…
In the presence of Earth gravity and gravity-gradient forces, centrifugal and Coriolis forces caused by the Earth rotation, the phase of the time-domain atom interferometers is calculated with accuracy up to the terms proportional to the…
Integrated micro and nanophotonic optomechanical experiments enable the manipulation of mechanical resonators on the single phonon level. Interfacing these structures requires elaborate techniques limited in tunability, flexibility, and…
A stable optical resonator has been built using a 30 micrometer-wide, metal-coated microcantilever as one mirror. The second mirror was a 12.7 mm-diameter concave dielectric mirror. By positioning the two mirrors 75 mm apart in a…
Background: Upper-limb weakness and tremor (4--12 Hz) limit activities of daily living (ADL) and reduce adherence to home rehabilitation. Objective: To assess technical feasibility and clinician-relevant signals of a sensor-fused wearable…
We describe a new type of magnetic field sensor which is termed an Electro-Mechanical Resonant Sensor (EMRS). The key part of this sensor is a small conductive elastic element with low damping rate and therefore a high Q fundamental mode of…
We propose a paradigmatic demonstration of the potentialities of a deformable mirror for closed-loop control of a two-photon momentum-entangled state, subject to phase fluctuations. A custom-made membrane mirror is used to set a relative…
A single-seed, module-based compact laser system is demonstrated on a transportable $^{87}\text{Rb}$-based high-precision atomic gravimeter. All the required laser frequencies for the atom interferometry are provided by free-space…
Atom interferometery is an exquisite measurement technique sensitive to inertial forces. However, it is commonly limited to a single sensitive axis, allowing high-precision multi-dimensional sensing only through subsequent or post-corrected…
The first cryomodule for the beam test facility at the Fermilab New-Muon-Lab building is currently under RF commissioning. Among other diagnostics systems, the transverse position of the helium gas return pipe with the connected 1.3 GHz SRF…
The present work deals with a curvature sensor that consists of two segments of asymmetric multicore fiber (MCF) fusion spliced with standard single mode fiber (SMF). The MCF comprises three strongly coupled cores; one of such cores is at…
Interferometers measure a wide variety of dynamic processes by converting a phase change into an intensity change. Nonlinear interferometers, making use of nonlinear media in lieu of beamsplitters, promise substantial improvement in the…
We present a numerical study of a MEMS-based design of a fiber cavity integrated with an ion trap system. Each fiber mirror is supported by a microactuator that controls the mirror's position in three dimensions. The mechanical stability is…
Cavity optomechanics has opened new avenues of research in both fundamental physics and precision measurement by significantly advancing the sensitivity achievable in detecting attonewton forces, nanoparticles, magnetic fields, and…