Related papers: Stacking polymorphism in PtSe$_2$ drastically affe…
The 1T polytype of TaS$_\textrm{2}$ has been studied extensively as a strongly correlated system. As 1T-TaS$_\textrm{2}$ is thinned towards the 2D limit, its phase diagram shows significant deviations from that of the bulk material.…
We study the effects of time-dependent substrate/film temperature in the deposition of a mesoscopically thick film using a statistical model that accounts for diffusion of adatoms without lateral neighbors whose coefficients depend on an…
Compression-induced buckling instability of metal thin films on a compliant base result in surface wrinkles. A stiff thin film, perfectly bonded to an infinitely deep pre-stretched dielectric elastomer (DE) substrate, is considered. Linear…
The crystal growth of isotactic polystyrene (it-PS) is investigated in very thin, 11 nm thick films. The it-PS crystals grown in the thin films show quite different morphology from that in the bulk. With decreasing crystallization…
The combination of metasurfaces with chalcogenide phase-change materials is a highly promising route towards the development of multifunctional and reconfigurable nanophotonic devices. However, their transition into real-world devices is…
Very recently there was a report of the discovery using piezoelectric force microscopy (PFM) of a switchable ferroelectric polarization in 1.6 % tensile strained TiO2 thin film with anatase crystal structure (see N. Deepak et al. Adv.…
A capacitive displacement system was constructed to measure the electric-field-induced piezoelectric strain in the simple form of either a bulk or thin film. The system can determine an AC displacement of 2 pm precisely by using a lock-in…
As demand rises for flexible electronics, traditionally prepared sintered ceramic sensors must be transformed into fully new sensor materials that can bend and flex in use and integration. Negative temperature coefficient of resistance…
The optical properties of phase-change materials (PCM) can be tuned to multiple levels by controlling the transition between their amorphous and crystalline phases. In multi-material PCM structures, the number of discrete reflectance levels…
Specific heat of polycrystalline BaTiO3 thin films on the fused quartz substrate was measured by ac-hot probe method. Phase transition temperature, excess entropy and spontaneous polarization were determined as a function of film thickness…
Thin films of the charge-ordered (CO) compound Pr$_{0.5}$Ca$_{0.5}$MnO$_{3}$ have been deposited onto (100)-oriented SrTiO$_{3}$ substrates using the Pulsed Laser Deposition technique. Magnetization and transport properties are measured…
Chalcogenide phase-change materials (PCMs) are important for nonvolatile memory and reconfigurable photonic technologies. The GeTe-Sb2Te3 mixture system, commonly referred to as GST, is the most well-known PCM family, but new PCMs are…
Recently, interface has been employed to enhance superconductivity in the single-layer FeSe films grown on SrTiO3(001)(STO) with a possible Tc of ~ 80 K, which is nearly ten times of the Tc of bulk FeSe and is above the Tc record of 56 K…
The synthesis of transition metal dichalcogenides (TMDs) has been a primary focus for 2D nanomaterial research over the last 10 years, however, only a small fraction of this research has been concentrated on transition metal ditellurides.…
Carbon nanosheets are mechanically stable free-standing two-dimensional materials with a thickness of ~1 nm and well defined physical and chemical properties. They are made by radiation induced cross-linking of aromatic self-assembled…
The structural and electrical properties of Ti-N films deposited by reactive sputtering depend on their growth parameters, in particular the Ar:N2 gas ratio. We show that the nitrogen percentage changes the crystallographic phase of the…
Ferroics and multiferroics are unique objects for fundamental physical research of complex nonlinear processes and phenomena, which occur in them in micro and nanoscale. Due to the possibility of their physical properties control by size…
We have investigated the correlation between structural and transport properties in sputtered $\beta$-FeSe films grown onto SrTiO$_3$ (100). The growth parameters, such as substrate temperature and thickness, have been varied in order to…
We present measurements of the electrical resistivity, $\rho$, in epitaxial Cr films of different thicknesses grown on MgO (100) substrates, as a function of temperature, $T$. The $\rho(T)$ curves display hysteretic behavior in certain…
Strongly correlated insulators, such as Mott or charge-transfer insulators, exhibit a strong temperature dependence in their resistivity. Consequently, self-heating effects can lead to electrothermal instabilities in planar thin film…