Related papers: Pressure Sensor with New Electrical Circuit Utiliz…
This work reports an approach to study complementary pairs of bipolar junction transistors, often used in push-pull circuits typically found at the output stages of operational amplifiers. After the data is acquired and pre-processed, an…
Active microelectromechanical systems can couple the nanomechanical domain with the electronic domain by integrating electronic sensing and actuation mechanisms into the micromechanical device. This enables very fast and sensitive…
In this work, a large area, low cost and flexible polymer/paper-based double touch mode capacitive pressure sensor is demonstrated. Garage fabrication processes are used which only require cutting, taping and assembly of aluminum (Al)…
Electronic systems are becoming more and more ubiquitous as our world digitises. Simultaneously, even basic components are experiencing a wave of improvements with new transistors, memristors, voltage/current references, data converters,…
A highly sensitive refractive index sensor based on grating-assisted strip waveguide directional coupler is proposed. The sensor is designed using two coupled asymmetric strip waveguides with a top-loaded grating structure in one of the…
This paper reports the application of zinc oxide (ZnO) in the pressure sensors that can be integrated with a microelectromechanical system (MEMS). ZnO is one of the materials that has received a great deal of attention due to its unique…
The planar Hall sensitivity of obliquely deposited NiFe(10)/Pt(tPt) /IrMn(8)/Pt(3) (nm) trilayer structures has been investigated by introducing interfacial modification and altering sensor geometry. The peak-to-peak PHE voltage and AMR…
Nanomechanical oscillators have been employed as transducers to measure force, mass and charge with high sensitivity. They are also used in opto- or electromechanical experiments with the goal of quantum control and phenomena of mechanical…
We developed a metallic pressure cell made of nickel-chromium-aluminum (NiCrAl) for use with a non-destructive pulse magnet and a magnetic susceptibility measurement apparatus with a proximity detector oscillator (PDO) in pulsed magnetic…
Magnetic sensing is present in our everyday interactions with consumer electronics, and also demonstrates potential for measurement of extremely weak biomagnetic fields, such as those of the heart and brain. In this work, we leverage the…
Pneumatic pressure cells with thin metallic spherical diaphragm of shallow spherical shell configuration linked with vibrating wire pickup or vibrating cantilever pickup were reported in the past. In order to enhance the sensitivity of the…
We report a nanoscale device concept based on a highly doped $\delta$-layer tunnel junction embedded in a semiconductor for charge sensing. Recent advances in Atomic Precision Advanced Manufacturing (APAM) processes have enabled the…
We present a novel experimental design for high sensitivity measurements of the electrical resistance of samples at high pressures (0-6GPa) and high temperatures (300-1000K) in a 'Paris-Edinburgh' type large volume press. Uniquely, the…
We introduce a zero-bias superconducting voltage amplifier that harvests energy from a thermal gradient by exploiting negative differential resistance (NDR) in an asymmetric tunnel junction. The device is based on an asymmetric…
Pursuing ultrasensitivity of pressure sensors has been a long-standing goal. Here, we report a piezoelectric sensor that exhibits supreme pressure-sensing performance, including a peak sensitivity up to 3.5*10^6 kPa^-1 in the pressure range…
We have developed an approach to control the carrier density in various material under high pressure by the combination of an electric double layer transistor (EDLT) with a diamond anvil cell (DAC). In this study, this EDLT-DAC was applied…
We report the design and implementation of a point-contact spectroscopy (PCS) system integrated with a dilution refrigerator, enabling measurements down to 30 mK. The setup employs a needle-anvil geometry with a cryogenic piezo-driven…
We report high performance p-type field-effect transistors based on single layered (thickness, ~0.7 nm) WSe2 as the active channel with chemically doped source/drain contacts and high-{\kappa} gate dielectrics. The top-gated monolayer…
A wide swing charge sensitive amplifier (CSA) has been developed, as a part of a front-end electronics (FEE) readout ASIC, for a prototype silicon tungsten (Si-W) based electromagnetic (EM) calorimeter. The CSA, designed in 0.35 $\mu$m…
Wireless electromagnetic sensing is a passive, non-destructive technique for measuring physical and chemical changes through permittivity or conductivity changes. However, the readout is limited by the sensitivity of the materials, often…