Related papers: Cascode Cross-Coupled Stage High-Speed Dynamic Com…

Comparators are utilised by Nyquist-rate and oversampling analog to digital converters (ADCs) to accomplish quantization and perhaps sampling. Thus, comparators have a substantial effect on the speed and accuracy of ADCs. This study…

Dynamic comparators are an essential part of low-power analog to digital converters (ADCs) and are referred to as one of the most important building blocks in mixed mode circuits. The power consumption and accuracy of dynamic comparators…

Strong-ARM Dynamic Latch Comparators are widely used in high-speed analog-to-digital converters (ADCs), sense amplifiers in memory, RFID applications, and data receivers. This paper presents different methods to improve the performance of…

Comparators have multifarious applications in various fields, especially used in analog to digital converters. Over the years, we have seen many different designs of single stage, dynamic latch type and double tail type comparators based on…

This paper describes a pipelined analog-to-digital converter (ADC) employing a power and area efficient architecture. The adjacent stages of a pipeline share operational amplifiers. In order to keep accuracy of the amplifiers in the first…

The ubiquitous use of sensing and signal processing is increasing exponentially with the advance of the Internet of Everything (IoE). In this context, the design of every time more power efficient sensor nodes is a must. Within these nodes,…

Analog-to-digital converters (ADCs) are a major contributor to the power consumption of multiple-input multiple-output (MIMO) communication systems with large number of antennas. Use of low resolution ADCs has been proposed as a means to…

The design and measurement results of ultra-low power, fast 10-bit Successive Approximation Register (SAR) Analog-to-Digital Converter (ADC) prototypes in 65 nm CMOS technology are presented. Eight prototype ADCs were designed using two…

This paper presents a dynamic predictive sampling (DPS) based analog-to-digital converter (ADC) that provides a non-uniform sampling of input analog continuous-time signals. The processing unit generates a dynamic prediction of the input…

Present semiconductor research is increasingly focusing on either higher speeds or higher linearity or both. Applications range from consumer, industrial, healthcare and military. Typically such circuits are fabricated in today's…

Key parameters of analog-to-digital converters (ADCs) are their sampling rate and dynamic range. Power consumption and cost of an ADC are directly proportional to the sampling rate; hence, it is desirable to keep it as low as possible. The…

A 64-channel mixed-mode ASIC, suitable for particle detectors of large dynamic range and high capacitance up to hundreds of pF, is presented here. Each channel features an analogue front-end for signal amplification and filtering, and a…

We present the design of a low-power 4-bit 1GS/s folding-flash ADC with a folding factor of two. The design of a new unbalanced double-tail dynamic comparator affords an ultra-low power operation and a high dynamic range. Unlike the…

We present the design and performance of a prototype ASIC digitizer for integrated wire chamber readout, implemented in 65 nm commercial CMOS technology. Each channel of the 4-channel prototype is composed of two 16-bit Time-to-Digital…

On-chip voltage regulation using distributed Digital Low Drop Out (LDO) voltage regulators has been identified as a promising technique for efficient power-management for emerging multi-core processors. Digital LDOs (DLDO) can offer low…

A family of interleaved current-fed high step-up dc-dc converters are introduced and analyzed here by combining a voltage multiplier (VM) and an active clamp circuit for high-voltage high-power applications. Low input currents and output…

The level crossing analog-to-digital converters are meant for the effective conversion of sparse signals by construction. In these converters, the bandwidth-power trade-off requires a re-design of the comparators which takes a lot of time…

- This paper describes a pipeline analog-to-digital converter is implemented for high speed camera. In the pipeline ADC design, prime factor is designing operational amplifier with high gain so ADC have been high speed. The other advantage…

The purpose of this project was to design and implement a pipeline Analog-to-Digital Converter using 0.35um CMOS technology. Initial requirements of a 25-MHz conversion rate and 8-bits of resolution where the only given ones. Although…

With the advent of the 5G wireless networks, achieving tens of gigabits per second throughputs and low, milliseconds, latency has become a reality. This level of performance will fuel numerous real-time applications, such as autonomy and…