Related papers: A High Throughput Study of both Compositionally Gr…
We have fabricated high-quality FeSe1-x superconducting films with a bulk Tc of 11-12 K on different substrates, Al2O3(0001), SrTiO3(100), MgO(100), and LaAlO3(100), by using a pulsed laser deposition technique. All the films were grown at…
Thin highly textured Fe$_{\mathrm{1+x}}$Co$_{\mathrm{2-x}}$Si ($0 \leq$ x $\leq 1$) films were prepared on MgO (001) substrates by magnetron co-sputtering. The magneto-optic Kerr effect (MOKE) and ferromagnetic resonance (FMR) measurements…
In recent years the intermetallic alloys of Fe and Sn have gained significant interest due to a rich variety of magnetic properties present in these materials. The crystal Fe3Sn2 is a frustrated ferromagnet, while the crystallographically…
Graded composition CdxZn1-xTe films were prepared by growing several alternate layers of CdTe and ZnTe by the Isothermal Close Space Sublimation technique. The thickness of both kinds of layers was modified along the structure to produce an…
We investigated structural, magnetic and electrical properties of sputter deposited Mn-Fe-Ga compounds. The crystallinity of the Mn-Fe-Ga thin films was confirmed using x-ray diffraction. X-ray reflection and atomic force microscopy…
Hard/soft magnetic bilayer thin films have been widely used in data storage technologies and permanent magnet applications. The magnetic configuration and response to temperatures and magnetic fields in these heterostructures are considered…
We investigated coercive fields of 200nm x 1200nm x 5nm rectangular nanocrystalline thin films as a function of grain size D using finite elements simulations. To this end, we created granular finite element models with grain sizes ranging…
Ferromagnetic films with perpendicular magnetic anisotropy are of interest in spintronics and superconducting spintronics. Perpendicular magnetic anisotropy can be achieved in thin ferromagnetic multilayer structures, when the anisotropy is…
The thermal deposition and transfer Printing method had been used to produce pentacene thin-films on SiO2/Si and plastic substrates (PMMA and PVP), respectively. X-ray diffraction patterns of pentacene thin films showed reflections…
Epitaxial copper thin films were deposited by magnetron sputtering. The adatoms during deposition are influenced by deposition parameters which cause variations in thin film properties. XRD and FESEM studies were done to get an insight into…
We grow epitaxial Sm-Co thin films by sputter deposition from an alloy target with a nominal SmCo5 composition on Cr(100)-buffered MgO(100) single-crystal substrates. By varying the Ar gas pressure, we can change the composition of the film…
The vast high entropy alloy (HEA) composition space is promising for discovery of new material phases with unique properties. We explore the potential to achieve rare-earth-free high magnetic anisotropy materials in single-phase HEA thin…
5$\mu$m thick NdFeB films have been sputtered onto 100 mm Si substrates using high rate sputtering (18 $\mu$m/h). Films were deposited at ≤ 500 C and then annealed at 750 C for 10 minutes. While films deposited at temperatures up to…
High throughput experimental methods are known to accelerate the rate of research, development, and deployment of electronic materials. For example, thin films with lateral gradients in composition, thickness, or other parameters have been…
The strong fascination exerted by the binary compound of FeSe demands reliable engineering protocols and more effective approaches towards inducing superconductivity in FeSe thin films. Our study addresses the peculiarities in pulsed laser…
Copper deposition has been carried out at various time span on glass slide and silicon substrate by using indigenously developed unbalanced type DC magnetron sputtering system. The main objective of this work is to study the crystalline…
We investigated high-frequency behavior of FeN thin films prepared by reactive sputtering through ferromagnetic resonance (FMR) and its relationship with the static magnetic properties. The FMR was observed in the frequency range from 2 to…
Stabilized FeSe thin films in ambient pressure with tunable superconductivity would be a promising candidate for superconducting electronic devices yet its superconducting transition temperature (Tc) is below 10 K in bulk materials. By…
FePd thin films have been recently considered as promising material for high-density magnetic storage devices. However, it is necessary to find a proper method of fabrication for the (001)-textured and chemically well-ordered alloy. In this…
Thickness uniformity is regarded as an important parameter in designing thin film devices. However, some applications based on films with non-uniform thickness have recently emerged, such as gas sensors and optimized materials based on the…