Related papers: A High Throughput Study of both Compositionally Gr…

Combinatorial sputtering is a physical vapor deposition method that enables the high-throughput synthesis of compositionally varied thin films. Using this technique, the effects of stoichiometry on specific properties of alloy thin films…

Impact of rapid thermal processing (RTP) on microstructure and magnetic properties of Gd-Fe thin films have been investigated with a special emphasis to magnetic microstructure. 100 nm thick amorphous Gd-Fe film shows elongated stripe…

The FeSe samples in the form of polycrystals, single crystals and thin films have been prepared and characterized. The synthesized material has been hot isostatically pressed under pressure of 0.45 GPa of 5N purity argon with the use of the…

We report pulsed laser deposition synthesis and characterization of polycrystalline Fe1-xCox Si thin films on Si (111). X-ray diffraction, transmission electron, and atomic force microscopies reveal films to be dense, very smooth, and…

The successful commercialization of flexible spintronic devices requires a complete understanding of the impact of external strain on the structural, electronic, and magnetic properties of a system. The impact of bending-induced strain on…

In this paper, we present an experimental study of $\text{L1}_0$-FePt granular films with crystalline/amorphous boron nitride (BN) grain boundary materials for heat assisted magnetic recording (HAMR). It is found that an adequate RF…

We have studied the processing of piezoelectric thick films using electrophoretic deposition (EPD) for high-frequency ultrasound applications. Lead-zirconium-titanate (PZT) particles synthetized by solid states synthesis were dispersed in…

We propose a way of formation of thin bilayer Pt$_3$Si/Pt$_2$Si films at room temperature on poly-Si substrates by Pt magnetron sputtering and wet etching, obtain such film, investigate its structure and phase composition and estimate the…

The longitudinal spin Seebeck effect is detected in sputter-deposited NiFe2O4 films using Pt as a spin detector and compared to previously investigated NiFe2O4 films prepared by chemical vapor deposition. Anomalous Nernst effects induced by…

Ferromagnetic resonance has been used to study the magnetic properties and magnetization dynamics of polycrystalline Fe$_{1-x}$V$_{x}$ alloy films with $0\leq x < 0.7$. Films were produced by co-sputtering from separate Fe and V targets,…

There is an ongoing debate about the relative importance of structural change versus doping charge carriers on the mechanism of superconductivity in Fe-based materials. Elucidating this issue is a major challenge since it would require a…

High-pressure torsion (HPT), a technique of severe plastic deformation (SPD), is shown as a promising processing method for exchange-spring magnetic materials in bulk form. Powder mixtures of Fe and SmCo$_{5}$ are consolidated and deformed…

Mixtures of Fe and Cu powders are cold-compacted and subsequently deformed with severe plastic deformation by high-pressure torsion, leading to bulk samples. The dilution of Fe in the Cu matrix is investigated with SQUID-magnetometry,…

The presumably unconventional superconductor Beta-FeSe was deposited by radio frequency sputtering and molecular beam epitaxy (MBE) from two elementary sources. Superconducting thin films were grown in (001)-orientation on MgO(100) and…

Strain has emerged as a promising approach for tuning electrocatalytic properties, yet its role in sputter-deposited thin films remains poorly understood. In this work, magnetron-sputtered platinum (Pt) thin films with different stress…

We present room temperature ferromagnetic resonance (FMR) studies of polycrystalline ||Pt/10 nm Cu/t Co/10 nm Cu/Pt|| films as a function of Co layer thickness (1 < t < 10 nm) grown by evaporation and magnetron sputtering. FMR was studied…

In this work, we have grown $\sim$100 nm thick pristine FeSe films by pulsed laser deposition. The films were structurally characterized with X-ray diffraction and their surface morphology checked through atomic force microscopy. Microwave…

FeTe is a prototypical parent compound of iron-based superconductors. While bulk FeTe is non-superconducting with a long-range bicollinear antiferromagnetic order, superconductivity has been achieved in thin films. However, the approaches…

Epitaxial Fe(Se,Te) thin films were prepared by pulsed laser deposition on (La0.18Sr0.82)(Al0.59Ta0.41)O3 (LSAT), CaF2-buffered LSAT and bare CaF2 substrates, which exhibit an almost identical in-plane lattice parameter. The composition of…

We have investigated the spin and orbital magnetic moments of Fe in FePt nanoparticles in the $L$1$_{0}$-ordered phase coated with SiO$_{2}$ by x-ray absorption spectroscopy (XAS) and x-ray magnetic circular dichroism (XMCD) measurements at…