Related papers: Dependence of Adhesive Friction on Surface Roughne…
We study the sliding of elastic solids in adhesive contact with flat and rough interfaces. We consider the dependence of the sliding friction on the elastic modulus of the solids. For elastically hard solids with planar surfaces with…
We investigate the effective friction encountered by a mass sliding on a granular layer as a function of bed thickness and boundary roughness conditions. The observed friction has minima for a small number of layers before it increases and…
We study the influence of surface roughness on the adhesion of elastic solids. Most real surfaces have roughness on many different length scales, and this fact is taken into account in our analysis. We consider in detail the case when the…
We performed molecular dynamics (MD) experiments to explore dry sliding friction at the nanoscale. We used the setup comprised of a spherical particle built up of 32,000 aluminium atoms, resting on a semi-space with a free surface, modelled…
We present an experimental and theoretical study of dry and glycerol-lubricated sliding for polymethyl methacrylate (PMMA) cylinders with different surface roughness sliding on polydimethylsiloxane (PDMS) rubber. This system represents a…
We present molecular dynamics friction calculations for confined hydrocarbon solids with molecular lengths from 20 to 1400 carbon atoms. Two cases are considered: (a) polymer sliding against a hard substrate, and (b) polymer sliding on…
Using molecular dynamics based on Langevin equations with a coordinate- and velocity-dependent damping coefficient, we study the frictional properties of a thin layer of "soft" lubricant (where the interaction within the lubricant is weaker…
The most direct measurement of adhesion is the pull-off force, i.e. the tensile force necessary to separate two solids in contact. For a given interface, it depends on various experimental parameters, including separation speed, contact age…
A macroscopically nominal flat surface is rough at the nanoscale level and consists of nanoasperities. Therefore, the frictional properties of the macroscale-level rough surface are determined by the mechanical behaviors of nanoasperity…
The mechanical response of elastic porous media confined within rigid geometries is central to a wide range of industrial, geological, and biomedical systems. However, current models for these problems typically overlook the role of wall…
The resistance against rolling of a rigid cylinder on a flat viscous surface is investigated. We found that the rolling-friction coefficient reveals strongly non-linear dependence on the cylinder's velocity. For low velocity the…
Particle-based simulations of discontinuous shear thickening (DST) and shear jamming (SJ) suspensions are used to study the role of stress-activated constraints, with an emphasis on resistance to gear-like rolling. Rolling friction…
We introduce a simple model to describe the frictional properties of granular media under shear. We model the friction force in term of the horizontal velocity v and the vertical position z of the slider, interpreting z as a constitutive…
This study numerically investigated the friction of viscoelastic objects with grooves. A 3D viscoelastic block with grooves on a rigid substrate is slowly pushed from the lateral side under uniform pressure on the top surface. The local…
Lubricated contacts in soft materials are important in various engineering systems and natural settings. Three major lubrication regimes are boundary (BL), mixed (ML), and elasto-hydrodynamic (EHL) lubrication, where the contact region is…
Motivated by roughness-induced adhesion enhancement (toughening and strengthening) in low modulus materials, we study the detachment of a sphere from a substrate in the presence of both viscoelastic dissipation at the contact edge, and…
Amontons' law states that the maximum static friction force on a solid object is proportional to the loading force and is independent of the apparent contact area. This law indicates that the static friction coefficient does not depend on…
Understanding surface mechanics of soft solids, such as soft polymeric gels, is crucial in many engineering processes, such as dynamic wetting and adhesive failure. In these situations, a combination of capillary and elastic forces drives…
We present a physical model for turbulent friction on rough surfaces with regularly distributed roughness elements. Wall shear stresses are expressed as functions of physical quantities. Surfaces with varying roughness densities and…
Molecular dynamics simulations have been performed to study frictional slip and its influence on energy dissipation and momentum transfer at atomically smooth solid/water interfaces. By modifying surface chemistry, we investigate the…