Related papers: A Tunnel Diode Oscillator for High Sensitivity Bro…
We describe a new table-top electrostatic storage ring concept for $30$ keV polarized ions at frozen spin condition. The device will ultimately be capable of measuring magnetic fields with a resolution of 10$^{-21}$ T with sub-mHz…
Capacitive devices are customarily used as probes to measure the level of noble liquids in detectors operated for neutrino studies and dark matter searches. In this work we describe the use of a high-temperature superconducting material as…
By measuring the electrical transport properties of superconducting NbN quarter-wave resonators in direct contact with a helium bath, we have demonstrated a high-speed and spatially sensitive sensor for the permittivity of helium. In our…
Commercial quartz oscillators of the tuning-fork type with a resonant frequency of ~32 kHz have been investigated in helium liquids. The oscillators are found to have at best Q values in the range 10^5-10^6, when measured in vacuum below…
In this paper we present a simple and efficient built-in temperature sensor for thermal monitoring of standard-cell based VLSI circuits. The proposed smart temperature sensor uses a ring-oscillator composed of complex gates instead of…
We present the design and operation of a very-low temperature Scanning Tunneling Microscope (STM) working at $60 mK$ in a dilution refrigerator. The STM features both atomic resolution and micron-sized scanning range at low temperature.…
A suspended system for measuring the thermal properties of membranes is presented. The sensitive thermal measurement is based on the 3$\omega$ dynamic method coupled to a V$\ddot{o}$lklein geometry. The device obtained using micro-machining…
In these torsional oscillator experiments the samples of solid $^4$He were characterized by measuring their thermal conducitvity. Polycrystalline samples of helium of either high isotopic purity or natural concentration of $^3$He were grown…
We report transport measurements as a function of bias in open semiconductor quantum dots. These measurements are well described by an effective electron temperature derived from Joule heating at the point contacts and cooling by…
We describe a new 17 T cryomagnet for neutron, x-ray or optical experiments with rapid in-situ sample change. Sample temperatures are controllable from < 2 K to 300 K in vacuum. Alternatively a room temperature bore insert can be used for…
Cavity optomechanical magnetic field sensors, constructed by coupling a magnetostrictive material to a micro-toroidal optical cavity, act as ultra-sensitive room temperature magnetometers with tens of micrometre size and broad bandwidth,…
We propose a new approach to measuring persistent currents in normal metal rings. By integrating micron-scale metal rings into sensitive micromechanical cantilevers and using the cantilevers as torque magnetometers, it should be possible to…
We assess the potential of two-terminal graphene-hBN-graphene resonant tunneling diodes as high-frequency oscillators, using self-consistent quantum transport and electrostatic simulations to determine the time-dependent response of the…
An AC susceptometer operating in the range of 10 Hz to 100 kHz and at room temperature is designed, built, calibrated and used to characterize the magnetic behaviour of coated magnetic nanoparticles. Other weakly magnetic materials (in…
We present the design and the circuit details of a high-sensitivity microwave vector detection system, which is aiming for studying the low-dimensional electron system embedded in the slots of a coplanar waveguide at low temperatures. The…
We describe a set-up for studying adsorption of helium in silica aerogels, where the adsorbed amount is easily and precisely controlled by varying the temperature of a gas reservoir between 80 K and 180 K. We present validation experiments…
Temperature imaging of nanoscale systems is a fundamental problem which has myriad potential technological applications. For example, nanoscopic cold spots can be used for spot cooling electronic components while hot spots could be used for…
A specific heat measuring instrument, with the capacity for the application of magnetic fields up to 9 Tesla, resorting to microcalorimetry chips from the company Xensor Integration, has been successfully assembled and its functioning…
Vibrating wires are common temperature probes in $^3$He experiments. By measuring mechanical resonance of a wire driven by AC current in magnetic field one can directly obtain temperature-dependent viscous damping. This is easy to do in a…
In this letter, we present the direct loss tangent measurement of a high-resistivity intrinsic (100) silicon wafer in the temperature range from ~ 70 mK to 1 K, approaching the quantum regime. The measurement was performed using a technique…