Related papers: Design, Fabrication, Characterization and Reliabil…
We present the results of an industry-grade fabrication of superconducting qubits on 200 mm wafers utilizing CMOS-established processing methods. By automated waferprober resistance measurements at room temperature, we demonstrate a…
Using field-effect transistors (FETs) to explore atomically thin magnetic semiconductors with transport measurements is difficult, because the very narrow bands of most 2D magnetic semiconductors cause carrier localization, preventing…
For semiconductor spin qubits, complementary-metal-oxide-semiconductor (CMOS) technology is the ideal candidate for reliable and scalable fabrication. Making the direct leap from academic fabrication to qubits fabricated fully by industrial…
Manufacturing of superconducting magnet for accelerators is a quite complex process that is not yet fully industrialized. In this paper, after a short history of the evolution of the magnet design and construction, we review the main…
Quality of the electrical contacts and interfaces in various metal/semiconductor/insulator heterostructures is one of the pivotal aspects in both applied and fundamental research areas. For instance, non-optimal contact resistance can limit…
The prospect of building a quantum information processor underlies many recent advances ion trap fabrication techniques. Potentially, a quantum computer could be constructed from a large array of interconnected ion traps. We report on a…
Over the past few years, significant growth has been observed in using MEMS based passive components in the RF microelectronics domain, especially in transceiver components. This is due to some excellent properties of the MEMS devices like…
We report multifunctional operation based on the nonlinear dynamics in a single microelectromechanical system (MEMS) resonator. This Letter focuses on a logic-memory device that uses a closed loop control and a nonlinear MEMS resonator in…
Carbon fiber composite can be a potential candidate for replacing metal-based battery enclosures of current electric vehicles (E.V.s) owing to its better strength-to-weight ratio and corrosion resistance. However, the strength of carbon…
This paper shows the effect of scaling silicon accelerometers down from MEMS to NEMS. It models both electronics and Brownian noise sources for both capacitive and resonant devices, and computes the minimum detectable signal attainable.…
A quasi-optical (QO) test bench was designed, simulated, and calibrated for characterizing S-parameters of devices in the 220-330 GHz (WR-3.4) frequency range, from room temperature down to 4.8 K. The devices were measured through vacuum…
In this work, we introduce CHIPS-FF (Computational High-Performance Infrastructure for Predictive Simulation-based Force Fields), a universal, open-source benchmarking platform for machine learning force fields (MLFFs). This platform…
Low Temperature Cofired Ceramics (LTCC) has been a popular multi layer ceramic (MCM) packaging material for many electronic applications. The main advantage with LTCC would be its ability to embed a major part of the electronic circuit…
Silicon microelectronics, consisting of complementary metal oxide semiconductor (CMOS) technology, have changed nearly all aspects of human life from communication to transportation, entertainment, and healthcare. Despite the widespread and…
Selective Laser Melting (SLM) technology has undergone significant development in the past years providing unique flexibility for the fabrication of complex metamaterials such as octet-truss lattices. However, the microstructure of the…
Micro fuel cells ($\mu$-FC) represent promising power sources for portable applications. Today, one of the technological ways to make $\mu$-FC is to have recourse to standard microfabrication techniques used in the fabrication of micro…
AlMn alloy flms are widely fabricated into superconducting transition edge sensors (TESs) for the detection of cosmic microwave background radiation. However, the application in X-ray or gamma-ray detection based on AlMn TES is rarely…
This work presents the design, fabrication, and testing of X-Cut Lithium Niobate (LN) acoustic nanoelectromechanical (NEMS) Laterally Vibrating Resonators (LVRs) and Degenerate LVRs (d-LVRs) operating in the S0 (YZ30) and SH0 (YZ-10) modes…
Machine Learning (ML) plays an increasingly important role in the discovery and design of new materials. In this paper, we demonstrate the potential of ML for materials research using hard-magnetic phases as an illustrative case. We build…
Considering the increasing number of experimental results in the manufacturing process of quantum dots with different geometries, and the fact that most numerical methods that can be used to investigate quantum dots with non-trivial…