Related papers: Laser ablation of Fe$_2$B target enriched in 10B c…
The $^{10}$B isotope has been almost exclusively used in the neutron-capture radiation therapy (NCT) of cancer for decades. We have identified two other nuclides suitable for the radiotherapy, which have ca.10 times larger cross section of…
We model an interaction of femtosecond laser pulses (800 nm, 100 fs, 1-100 TW/cm$^2$) with metal targets (Al, Au, Cu, and Ni). A detailed analysis of laser-induced phase transitions, melting wave propagation and material decomposition is…
A novel scheme is presented for production of a thin ($<1$ mm) uniform vapor layer over a large surface area ($>100$ cm$^2$) by pulsed laser ablation of a solid surface. Instead of dispersing the laser energy uniformly over the surface, a…
We report on photo ionization of ultracold magnetically trapped Rb atoms on an atom chip. The atoms are trapped at 5 $\mu $K in a strongly anisotropic trap. Through a hole in the chip with a diameter of 150 $\mu $m two laser beams are…
Boron nitride (BN) is today considered as one of the most promising materials for many novel applications including bright single photon emission, deep UV opto-electronics, small sized solid-state neutron detector, and high-performance…
The data of experimental studies of optical characteristics of colloidal solutions, composition and morphology of its dispersed phase, resulting from laser ablation of zinc in aqueous solutions of anionic surfactants --- sodium dodecyl…
Here we report the generation of MeV alpha-particles from H-11B fusion initiated by laser-accelerated boron ions. Boron ions with maximum energy of 6MeV and fluence of 10^9/MeV/sr@5MeV were generated from 60-nm-thick self-supporting boron…
Ion acceleration by using a laser pulse irradiating a disk target which includes hydrogen and carbon is examined using three-dimensional particle-in-cell simulations. It is shown that over $200$ MeV protons can be generated by using a…
In laser micromachining, the ablation threshold (minimum fluence required to cause ablation) is a key performance parameter and overall indicator of the efficiency of material removal. For pulsed laser micromachining, this important…
We demonstrate that thousands of periodic nano-craters are fabricated on a subwavelength-diameter tapered optical fiber, an optical nanofiber, by irradiating with just a single femtosecond laser pulse. A key aspect of the fabrication is…
Micro- or nano-structured targets are advantageous in enhancing and manipulating laser-proton acceleration, due to the increased absorption of laser energy and onset of direct laser acceleration for high-energy electrons. Here, we…
Protontherapy is hadrontherapy fastest-growing modality and a pillar in the battle against cancer. Hadrontherapy superiority lies in its inverted depth-dose profile, hence tumour-confined irradiation. Protons, however, lack distinct…
Selective thin-film removal is needed in many microfabrication processes such as 3-D patterning of optoelectronic devices and localized repairing of integrated circuits. Various wet or dry etching methods are available, but laser machining…
Ablation of Cu and Al targets has been performed with 170 fs laser pulses in the intensity range of 10^12-10^14 W/cm^2. We compare the measured removal depth with 1D hydrodynamic simulations. The electron-ion temperature decoupling is taken…
Strong saturated absorption at nanowatt power levels has been demonstrated using metastable xenon in a high-finesse optical cavity. The use of metastable xenon allows a high quality factor of Q=2*10^8 to be achieved at relatively high…
The interaction of intense fs laser pulses with thin foils that have an imposed deformation is compared with thick targets that develop bow shocks. Both target types yield good absorption. Up to 80% absorption is obtained for a $0.2\mu m$…
Laser-induced water ablation triggers various physical effects, including atom ionization, optical breakdown of the liquid, phase explosion, cavitation, and shockwave propagation. These effects can be further amplified in heavy water by…
Focused Ion Beam (FIB) processing has been established as a well-suited and promising technique in R&D in nearly all fields of nanotechnology for patterning and prototyping on the micro and nanometer scale and below. Among other concepts,…
Previous measurements have shown large cross sections for the 11B(p,$\alpha$)8Be reaction and K-shell ionization of boron from H+ ions. Past publications have shown that this reaction will likely increase the efficacy of proton therapy.…
Nanoparticles of iron were prepared in distilled water using very thin iron wires and sheets, by the electro-exploding wire technique. Transmission electron microscopy reveals the size of the nanoparticles to be in the range 10 to 50 nm.…