Related papers: Tuning magnetocaloric effect by optimizing thickne…
Magnetocaloric materials can be useful in magnetic refrigeration applications, but to be practical the magneto-refrigerant needs to have a very large magnetocaloric effect (MCE) near room temperature for modest applied fields (<2 Tesla)…
NiO thin films with various strains were grown on SrTiO3 (STO) and MgO substrates using a pulsed laser deposition technique. The films were characterized using an x-ray diffractometer, atomic force microscopy, and infrared reflectance…
Huge deformations of the crystal lattice can be achieved in materials with inherent structural instability by epitaxial straining. By coherent growth on seven different substrates the in-plane lattice constants of 50 nm thick Fe70Pd30 films…
The modulated optical reflectance (MOR) measurement technique was applied to colossal magnetoresistive materials, in particular, La2/3Sr1/3MnO3 (LSMO) thin films. The contactless measurement scheme is prospective for many applications…
Thin films of La5/8-yPryCa3/8MnO3 (y~0.4) have been grown on single crystal SrTiO3 (001) by RF sputtering. The structural and surface characterizations confirm the epitaxial nature of these film. However, the difference between the rocking…
The effects of uniaxial strain on the structural, orbital, optical, and magnetic properties of LaMnO_3 are calculated using a general elastic energy expression, along with a tight-binding parameterization of the band theory. Tensile…
Refrigeration systems based on compression of greenhouse gases are environmentally threatening and cannot be scaled down to on-chip dimensions. In the vicinity of a phase transition caloric materials present large thermal responses to…
Epitaxial LaRh1/2Mn1/2O3 thin films have been grown on (001)-oriented LaAlO3 and SrTiO3 substrates using pulsed laser deposition. The optimized thin film samples are semiconducting and ferromagnetic with a Curie temperature close to 100 K,…
Recent studies have shown that the magnetic properties of the ferromagnetic perovskite oxide La$_{2/3}$ Sr$_{1/3}$ MnO$_3$ (LSMO) grown on an SrTiO3 (STO) substrate, such as its magnetic moment and Curie temperature, can be improved by…
Al2O3 thin films have been deposited at substrate temperatures between 500{\deg}C to 600{\deg}C by reactive magnetron sputtering using an additional arbitrary substrate bias to tailor the energy distribution of the incident ions. The films…
We investigate the structural and magnetic properties of La$_{0.7}$Sr$_{0.3}$CrO$_3$ (LSCO)/La$_{0.7}$Sr$_{0.3}$MnO$_3$(LSMO) heterostructures grown on (001)-oriented MgO by molecular beam epitaxy. Due to the large film-substrate lattice…
To understand the near-interface magnetism in manganites, uniform, ultra-thin films of La_{0.67}Sr_{0.33}MnO_3 were grown epitaxially on single crystal (001) LaAlO_3 and (110) NdGaO_3 substrates. The temperature and magnetic field dependent…
Measurements of magneto-thermopower (S(H, T)) of interfacial delta doped LaTiO$_3$/SrTiO$_3$ (LTO/STO) heterostructure by an iso-structural antiferromagnetic perovskite LaCrO$_3$ are reported. The thermoelectric power of the pure LTO/STO…
The effect of growth conditions on the structural and electronic properties of the polar/non-polar LaCrO$_3$/SrTiO$_3$ (LCO/STO) interface has been investigated. The interface is either insulating or metallic depending on growth conditions.…
We have investigated the out-of-plane lattice relaxation related to the ferroelectric transitions in epitaxial BaTiO$_3$ (BTO) films using synchrotron X-ray diffraction. Under either compressive strain or tensile strain, there is evidence…
Epitaxial La$_{2/3}$Sr$_{1/3}$MnO$_3$ (LSMO) films have been grown on SrTiO$_3$ (001) substrates via pulsed laser deposition. In a 22-nm thick LSMO film with a low residual resistivity of $\rho_0$ = 59 $\mu \Omega$ cm, we found a zero-field…
The issue of interlayer exchange coupling in magnetic multilayers with superconducting (SC) spacer is addressed in La$_{0.67}$Sr$_{0.33}$MnO$_{3}$ (LSMO) - YBa$_{2}$Cu$_{3}$O$_{7}$ (YBCO) - La$_{0.67}$Sr$_{0.33}$MnO$_{3}$ (LSMO) epitaxial…
Nd$_{2-x}$Ce$_x$CuO$_{4\pm\delta}$ (NCCO) epitaxial thin films have been deposited on (100) SrTiO$_3$ substrates by DC sputtering technique in different atmosphere. The as-grown samples show different dependence of the in-plane resistivity…
Superlattices built from two antiferromagnetic (AFM) charge/orbital order compounds, $Pr_{0.5}Ca_{0.5}MnO_3$ and $La_{0.5}Ca_{0.5}MnO_3$, have been studied as the thickness of $La_{0.5}Ca_{0.5}MnO_3$ ($LCMO$) varied. High structural quality…
The strain effect from a substrate is an important experimental route to control electronic and magnetic properties in transition-metal oxide (TMO) thin films. Using hard x-ray photoemission spectroscopy, we investigate the strain…