Related papers: The Three-Dipole Kicker Injection Scheme for the A…

We report on the design, realization and characterization of optically pumped micropillar lasers with low-absorbing Al$_{0.2}$Ga$_{0.8}$As/Al$_{0.9}$Ga$_{0.1}$As dielectric Bragg reflectors (DBRs) instead of commonly used GaAs/AlGaAs DBRs.…

In semiconductor nanostructures nonradiative Auger recombination is enhanced by the presence of boundaries which relax the momentum conservation and thereby removes the threshold reduction for these processes. We propose a method to…

The baseline configuration of the International Linear Collider requires 2 beam dumps per interaction region, each rated to 18MW of beam power, together with additional beam dumps for tuning purposes and machine protection. The baseline…

Currently, Sb$_2$Se$_3$ thin films receive considerable research interest as a solar cell absorber material. When completed into a device stack, the major bottleneck for further device improvement is the open circuit voltage, which is the…

The multi-bunch injection has been adopt at SSRF which greatly increases the injection rate and reduces injection time compared to the single bunch injection. The multi-bunch injection will massively reduce the beam failure time during…

We investigate the integration of Al2O3 high-k dielectric on two-dimensional (2D) crystals of boron nitride (BN) and molybdenum disulfide (MoS2) by atomic layer deposition (ALD). We demonstrate the feasibility of direct ALD growth with…

In the upgrade project of Hefei Light Source (HLS II), a new digital longitudinal bunch-by-bunch feedback system will be developed to suppress the coupled bunch instabilities in the storage ring effectively. We design a new waveguide…

Intrabeam scattering (IBS) limits the emittance and single-bunch current that can be achieved in electron or positron storage ring colliders, damping rings, and light sources. Much theoretical work on IBS exists, and while the theories have…

Multilayer microparticles with a liquid core and a polycomposite light-absorbing shell are important components of modern bio- and medical technologies, in particular, as transport microcontainers in the system of targeted delivery of…

The proton irradiation accelerator is widely founded for industry application, and should be designed as compact, reliable, and easy operate. A 10 MeV proton beam is designed to be injected into the slow circulation ring with the repetition…

This paper reports on the design and construction of a chamber for the muon identifier detector (MID) of the ALICE 3 upgrade project. The chamber consists of two sensitive layers separated by a 1 cm air gap. Each layer holds 24 scintillator…

A test of the acceleration of multiple charge-state uranium beams was performed at the ATLAS accelerator. A 238U+26 beam was accelerated in the ATLAS PII linac to 286 MeV (~1.2 MeV/u) and stripped in a carbon foil located 0.5 m from the…

We investigated the phenomena of self-stimulation of incoherent emission from an undulator installed in the linear accelerator or quasi-isochronous storage ring. We discuss possible applications of these phenomena for the beam physics also.

We present a new symmetry-based concept for an achromatic low-beta collider interaction region design. A specially-designed symmetric Chromaticity Compensation Block (CCB) induces an angle spread in the passing beam such that it cancels the…

We propose an efficient multiband absorber comprising a truncated one-dimensional periodic metal-dielectric photonic crystal and a reflective substrate. The reflective substrate is actually an optically thick metallic film. Such a planar…

Black body materials prove promising candidates to meet future energy demands as they are able to harvest energy from the total bandwidth of solar radiation. Here, we report on high absorption (> 98 %) near-black body-like structures…

The innermost part of the tracking detector of the ATLAS experiment consists mainly of planar n$^+$-in-n silicon pixel sensors. During the phase-0 upgrade, the Insertable B-Layer (IBL) was installed closest to the beam pipe. Its pixels are…

The successful operation of a Two-Beam accelerator based on extended relativistic klystrons hinges upon decreasing the cumulative dipole BBU growth from an exponential to a more manageable linear growth rate. We describe the theoretical…

This letter describes the design and operation of a polymer-based third order distributed feed-back (DFB) microfluidic dye laser. The device relies on light-confinement in a nano-structured polymer film where an array of nanofluidic…

We demonstrate dispersion engineering of integrated silicon nitride based ring resonators through conformal coating with hafnium dioxide deposited on top of the structures via atomic layer deposition (ALD). Both, magnitude and bandwidth of…