Related papers: Polarization purity for active stabilization of di…
Frequency stabilization of laser light is crucial in both scientific and industrial applications. Technological developments now allow analog laser stabilization systems to be replaced with digital electronics such as field-programmable…
This paper presents a laser amplifier based on an antireflection coated laser diode. This laser amplifier operates without active temperature stabilisation at any wavelength within its gain profile without restrictions on the injection…
We present a novel and simple method of stabilizing the laser phase and frequency by polarization spectroscopy of an atomic vapor. In analogy to the Pound-Drever-Hall method, which uses a cavity as a memory of the laser phase, this method…
We developed a high-power laser system at a wavelength of 399 nm for laser cooling of ytterbium atoms with ultraviolet laser diodes. The system is composed of an external cavity laser diode providing frequency stabilized output at a power…
The optical manipulation of Ba$^{+}$ ions is mainly performed by a 493 nm laser for the S$_{1/2}$-P$_{1/2}$ transition and a 650 nm laser for the P$_{1/2}$-D$_{3/2}$ transition. Since the branching ratio between the 493 nm and 650 nm…
In this paper, we present an experimental study of the metrological stabilization of a solid-state frequency comb for embedded metrology applications. The comb is a passively mode-locked laser diode based on InGaAs/InP Quantum-dash…
We review the conventional phase-locking technique in the long-term stabilization of the mode-locked fiber laser and investigate the phase noise limitation of the conventional technique. To break the limitation, we propose an improved…
We present a current-modulation technique for diode-laser systems that is specifically designed for high-bandwidth laser-frequency stabilization and wideband frequency modulation with a flat transfer function. It consists of a dedicated…
The Pound-Drever-Hall (PDH) technique is a popular method for stabilizing the frequency of a laser to a stable optical resonator or, vice versa, the length of a resonator to the frequency of a stable laser. We propose a refinement of the…
We implement three-dimensional polarization gradient cooling of trapped ions. Counter-propagating laser beams near $393\,$nm impinge in lin$\,\perp\,$lin configuration, at a frequency below the S$_{1/2}$ to P$_{3/2}$ resonance in…
We report in detail the design process and performance of an auto-locking ultra-stable laser with sub-hertz linewidth at the first time. The laser frequency is automatically stabilized to an optical reference cavity with a home-made…
We report ultra-stable locking of a commercially available extended cavity diode laser to a vibration-insensitive high finesse Fabry-Perot cavity. A servo bandwidth of 2 MHz is demonstrated. The absolute stability of the diode laser after…
This article provides an introduction to one of the most efficient laser stabilization techniques - the Pound-Drever-Hall (PDH) method. The aim of the experiment is to build the PDH stabilization apparatus from scratch. I describe all the…
We report on the generation of 500 mW of spectrally pure laser light at the 460.86 nm transition used for laser cooling of strontium atoms. To this end we inject a high power single mode laser diode with light from a stabilized extended…
Perovskite light-emitting diodes (PeLEDs) have emerged as a strong contender for next-generation display and information technologies. However, similar to perovskite solar cells, the poor operational stability remains the main obstacle…
The stabilization of lasers on ultra-stable optical cavities by the Pound-Drever-Hall (PDH) technique is a widely used method. The PDH method relies on the phase-modulation of the laser, which is usually performed by an electro-optic…
Laser power fluctuations can significantly reduce the device performances in various applications. High frequency fluctuations impact the signal-to-noise ratio, while slow variations can reduce the device repeatability or accuracy. Here we…
We herein report a simultaneous frequency stabilization of two 780-nm external cavity diode lasers using a precision wavelength meter (WLM). The laser lock performance is characterized by the Allan deviation measurement in which we find…
Isotope selective optical excitation of atoms is important for experiments with neutral atoms, metrology, and work with trapped ions, including quantum information processing. Polarization-enhanced absorption spectroscopy is used to…
Laser power instability, encompassing random jitter and slow drift, severely limits the performance of optically pumped magnetometers (OPMs) in detecting ultra-weak magnetic fields, especially in large-scale OPM arrays for…