Related papers: Robust Analog Beamforming for Periodic Broadcast V…
The performance of a previously developed analog combining network (ACN) of phase shifters for vehicle-to-vehicle communication is investigated. The original ACN was designed to maximize the sum of the signal-to-noise ratios (SNRs) for $K$…
A hybrid analog-digital combiner for broadcast vehicular communication is proposed. It has an analog part that does not require any channel state information or feedback from the receiver, and a digital part that uses maximal ratio…
Transmit beamforming is a versatile technique for signal transmission from an array of $N$ antennas to one or multiple users [1]. In wireless communications, the goal is to increase the signal power at the intended user and reduce…
The joint design of analog beamforming and power allocation is investigated for a single radio-frequency chain multiuser time-division multiple access system under a max-min signal-to-noise ratio (SNR) criterion. A hardware-efficient…
Medium-scale or large-scale receive antenna array with digital beamforming can be employed at receiver to make a significant interference reduction, but leads to expensive cost and high complexity of the RF-chain circuit. To deal with this…
The potential of using of millimeter wave (mmWave) frequency for future wireless cellular communication systems has motivated the study of large-scale antenna arrays for achieving highly directional beamforming. However, the conventional…
In this paper, we propose a two-stage analog combining architecture for millimeter wave (mmWave) communications with hybrid analog/digital beamforming and low-resolution analog-to-digital converters (ADCs). We first derive a two-stage…
For critical services, such as traffic safety and traffic efficiency, it is advisable to design systems with robustness as the main criteria, possibly at the price of reduced peak performance and efficiency. Ensuring robust communications…
Consider transceiver designs in a multiuser multi-input single-output (MISO) downlink channel, where the users are to receive the same data stream simultaneously. This problem, known as physical-layer multicasting, has drawn much interest.…
Ambient backscatter communication (AmBC) is becoming increasingly popular for enabling green communication amidst the continual development of the Internet-of-things paradigm. Efforts have been put into backscatter signal detection as the…
The question of robust direct communication in vehicular networks is discussed. In most state-of-the-art approaches, there is no central entity controlling channel access, so there may be arbitrary interference from other parties. Thus, a…
In this paper, a novel full-duplex non-coherent (FD-NC) transmission scheme is developed for massive multiple-input multiple-output (mMIMO) systems using analog beamforming (ABF). We propose to use a structured Grassmannian constellation…
Adaptive interference cancellation is rapidly becoming a necessity for our modern wireless communication systems, due to the proliferation of wireless devices that interfere with each other. To cancel interference, digital beamforming…
This paper designs hybrid analog-digital channel estimation and beamforming techniques for multiuser massive multiple input multiple output (MIMO) systems with limited number of radio frequency (RF) chains. For these systems, first we…
For 5G it will be important to leverage the available millimeter wave spectrum. To achieve an approximately omni- directional coverage with a similar effective antenna aperture compared to state of the art cellular systems, an antenna array…
For 5G it will be important to leverage the available millimeter wave spectrum. To achieve an approximately omni- directional coverage with a similar effective antenna aperture compared to state of the art cellular systems, an antenna array…
This paper considers hybrid beamforming (HB) for downlink multiuser massive multiple input multiple output (MIMO) systems with frequency selective channels. For this system, first we determine the required number of radio frequency (RF)…
The demands for high data rates in 6G networks have driven the transition toward higher frequencies and larger antenna apertures, giving rise to the near-field communications. In the near-field region, spherical waves enable beam focusing…
This paper proposes a hybrid beamforming framework for massive multiple-input multiple-output (MIMO) in near-space airship-borne communications. To achieve high energy efficiency (EE) in energy-constraint airships, a dynamic subarray…
In this letter, we propose a blockwise phase rotation-aided analog transmit beamforming (BPR-ATB) scheme to improve the spectral efficiency and the bit-error-rate (BER) performance in millimeter wave (mmWave) communication systems. Due to…