Related papers: Method for critical current angular dependencies a…
High-temperature superconductors (HTS) are finding use as high - current wires for potential application in power devices. The dependence of their basal-plane critical current properties on orientation in a magnetic field can pose important…
Numerical models for computing the effective critical current of devices made of HTS tapes require the knowledge of the Jc(B,theta) dependence, i.e. of the way the critical current density Jc depends on the magnetic flux density B and its…
An exact analytical solution is given for the critical state problem in long thin superconductor strips in a perpendicular magnetic field, when the critical current density j_c(B) depends on the local induction B according to a simple…
The field-angular dependence and anisotropy of the critical current density in iron-based superconductors is evaluated using a phenomenological approach featuring distinct anisotropy factors for the penetration depth and the coherence…
A thin flat superconductor of arbitrary shape and with arbitrary in-plane and out-of-plane anisotropy of flux-line pinning is considered, in an external magnetic field normal to its plane. It is shown that the general three-dimensional…
The estimation of the critical current ($I_c$) and AC losses of high-temperature superconductor (HTS) devices through modeling and simulation requires the knowledge of the critical current density ($J_c$) of the superconducting material.…
To understand the anisotropy of flux pinning and critical current density in technological superconductors, the scaling law for the anisotropy of single-vortex collective pinning in uniaxial superconductors is extended to flux-bundle…
We introduce a critical-state model incorporating the anisotropy of flux-line pinning to analyze the critical states developing in an anisotropic biaxial superconducting slab exposed to a uniform perpendicular magnetic field and to two…
The critical state of a thin superconducting strip in an oblique applied magnetic field H_a is analyzed without any restrictions on the dependence of the critical current density j_c on the local magnetic induction {\bf B}. In such a strip,…
The current transport in polycrystalline MgB$_2$ is strongly influenced by the intrinsic anisotropy of this superconductor. Untextured bulks and wires are macroscopically isotropic, but the grains retain their anisotropic properties and the…
Detailed measurements of the in-plane resistivity were performed in a high-quality Ba(Fe$_{1-x}$Co$_{x}$)$_2$As$_2$ ($x=0.065$) single crystal, in magnetic fields up to 9 T and with different orientations $\theta$ relative to the crystal…
Studies on the new MgB2 superconductor, with a critical temperature Tc ~ 39 K, have evidenced its potential for applications although intense magnetic relaxation effects limit the critical current density, Jc, at high magnetic fields. This…
From the application point of view, large critical current densities Jc (H) for superconducting wires are required, preferably for magnetic fields higher than 5 T. Here we show that strong c-axis textured Sr1-xKxFe2As2 tapes with nearly…
We report on angle-resolved magnetization measurements on NdFeAsO$_{0.65}$F$_{0.35}$ (Nd-1111) single crystals. The field dependence of the critical current density, $J_c$, is non-monotonous in these crystals at all orientations and…
We apply the vortex path model of critical currents to a comprehensive analysis of contemporary data on defect-engineered superconductors, showing that it provides a consistent and detailed interpretation of the experimental data for a…
Investigating the anisotropy of superconductors permits an access to fundamental properties. Having succeeded in the fabrication of epitaxial superconducting LaFeAs(O,F) thin films we performed an extensive study of electrical transport…
The anisotropy of MgB2 is still under debate: its value, strongly dependent on the sample and on the measuring method, ranges between 1.2 and 13. In this work we present our results on a MgB2 c-oriented superconducting thin film. To…
Current and field profiles, and magnetization and AC losses are calculated for an array of infinitely long superconducting tapes arranged vertically in a perpendicularly applied magnetic field. Calculations are based on the critical state…
A finite stack of thin superconducting tapes, all carrying a fixed current I, can be approximated by an anisotropic superconducting bar with critical current density Jc=Ic/2aD, where Ic is the critical current of each tape, 2a is the tape…
The angular-dependent critical current density, Jc(theta), and the upper critical field, Hc2(theta), of epitaxial Ba(Fe1-xCox)2As2 thin films have been investigated. No Jc(theta) peaks for H || c were observed regardless of temperatures and…