Related papers: Reduced etch lag and high aspect ratios by deep re…
High entropy alloys (HEAs) have captured much attention in recent years due to their conceivably improved radiation resistance compared to pure metals and traditional alloys. However, among HEAs, there are millions of design possibilities…
We present an optimized strategy for the production of tightly confined Bose-Einstein condensates (BEC) of 87Rb in a crossed dipole trap with direct loading from a magneto-optical trap. The dipole trap is created with light of a…
Molecular beam epitaxy is one of the highest quality growth methods, capable of achieving theoretical material property limits and unprecedented device performance. However, such ultimate quality usually comes at the cost of painstaking…
Many promising applications of single crystal diamond and its color centers as sensor platform and in photonics require free-standing membranes with a thickness ranging from several micrometers to the few 100 nm range. In this work, we…
Nanofabrication research pursues the miniaturization of patterned feature size. In the current state of the art, micron scale areas can be patterned with features down to ~ 30 nm pitch using electron beam lithography. Our work demonstrates…
Growing interest in devices based on layered van der Waals (vdW) materials is motivating the development of new nanofabrication methods. Hexagonal boron nitride (hBN) is one of the most promising materials for studies of quantum photonics…
We propose a holographic version of a reconfigurable intelligent surface (RIS) and investigate its application to terahertz (THz) massive multiple-input multiple-output systems. Capitalizing on the miniaturization of THz electronic…
We report on mask-less, high resolution etching of diamond surfaces, featuring sizes down to 10 nm. We use a scanning electron microscope (SEM) together with water vapor, which was injected by a needle directly onto the sample surface.…
For many emerging optoelectronic materials, heteroepitaxial growth techniques do not offer the same high material quality afforded by bulk, single-crystal growth. However, the need for optical, electrical, or mechanical isolation at the…
This paper reports on a novel compact, low-loss bending technique for additively manufactured dielectric image lines between 140 GHz and 220 GHz. Conventional bending approaches require either large curvature radii or technologically…
A novel digital reconfigurable 2_bit metamaterial, equipped with a substrate integrated feeding system, is designed for industrial quality control applications within the terahertz frequency range. The proposed feeding mechanism facilitates…
Lithium niobate (LiNbO$_3$, LN) is a ferroelectric crystal of interest for integrated photonics owing to its large second-order optical nonlinearity and the ability to impart periodic poling via an external electric field. However, on-chip…
A Bayesian model to infer edge electron density profiles is developed for the JET lithium beam emission spectroscopy system, measuring Li I line radiation using 26 channels with ~1 cm spatial resolution and 10~20 ms temporal resolution. The…
The Laue diffraction microscopy experiment uses the polychromatic Laue micro-diffraction technique to examine the structure of materials with sub-micron spatial resolution in all three dimensions. During this experiment, local…
Multilayer metasurfaces provide substantially greater spectral design freedom than single-layer devices, yet their implementation in the visible and near-infrared remains limited by the complexity, cost, and low throughput of conventional…
We have evaluated the optical and electrical properties of a far-infrared (IR) transparent electrode for extrinsic germanium (Ge) photoconductors at 4 K, which was fabricated by molecular beam epitaxy (MBE). As a far-IR transparent…
Perturbations to the effective refractive index from nanometer-scale fabrication variations in waveguide geometry plague high index-contrast photonic platforms including the ubiquitous sub-micron silicon-on-insulator (SOI) process. Such…
Phase reconstruction is important in transmission electron microscopy for structural studies. We describe electron Fourier ptychography and its application to phase reconstruction of both radiation-resistant and beam-sensitive materials. We…
Ultrafast electron diffraction (UED) instruments typically operate at kHz or lower repetition rates and rely on indirect detection of electrons. However, these experiments encounter limitations because they are required to use electron…
Future observatories utilizing reflection grating spectrometers for extreme ultraviolet (EUV) and soft X-ray (SXR) spectroscopy require high-fidelity gratings with both blazed groove facets and custom groove layouts that are often fanned or…