Related papers: Exploration of co-sputtered Ta$_2$O$_5$-ZrO$_2$ th…
Future gravitational wave detectors (GWDs) such as Advanced LIGO upgrades and the Einstein Telescope are planned to operate at cryogenic temperatures using crystalline silicon (cSi) test-mass mirrors at an operation wavelength of 1550 nm.…
Copper ferrite thin films were rf sputtered at a power of 50W. The as deposited films were annealed in air at 800{\deg}C and slow cooled. The transmission electron microscope (TEM) studies were carried out on as deposited as well as on slow…
In this work, we have demonstrated wide-composition-range \b{eta}-(AlxGa1-x)2O3 thin films with record-high Al compositions up to 77% for \b{eta}-(AlxGa1-x)2O3 covering bandgaps from 4.9 to 6.4 eV. With optimized thermal annealing…
Magnetron sputtering has also been used to deposit thin films of some materials and it has significant technological importance. A modeling on deposition of epitaxial thin films of Yttrium Stabilized Zirconia (YSZ) was done the diffusion of…
We report on the structural and superconducting properties of nanocrystalline tungsten thin films growth by sputtering at room temperature with an N2:Ar mixture (N2 from 3% to 50%). The crystalline phases were identified by comparing…
The transverse magnetoresistance of thin films of the Diluted Magnetic Semiconductor Zn$_{1-x}$Co$_{x}$O:Al on glass was studied for temperatures in the range of 5 to 100 K. Measurements were made on thin films grown by rf magnetron…
We report the low temperature growth of vertically aligned ZnO nanocolumns on Si substrates by using reactive radio frequency magnetron sputtering.High sputtering pressure combined with low substrate temperatures induce a pronounced self…
In this paper we report the deposition of epitaxial thin films of Nd1-xSrxCoO3 with x=0, 0.2 and 0.5 on single crystalline substrates (SrTiO3 and LaAlO3) carried out by means of rf-magnetron sputtering. The deposited films are all…
Titanium nitride is a material of interest for many superconducting devices such as nanowire microwave resonators and photon detectors. Thus, controlling the growth of TiN thin films with desirable properties is of high importance. In…
The Si based TiO2 thin films were prepared via the combination both of Sol-Gel and Spin-Coating method. The films were sintered at 850 degrees Celsius for half an hour, and the resulting films were characterized by X-ray diffraction (XRD)…
This investigation deals with the effect of annealing temperature on the structural, topographical and optical properties of Zinc Oxide thin films prepared by sol gel method. The structural properties were studied using X-ray diffraction…
By studying the temperature-dependent behavior of electron thermal conductivity (k) in a 3.2 nm-thin film, we quantify the extremely confined defect-electron scattering and reveal the intrinsic phonon-electron scattering that is shared by…
In the present work, ultrathin films of Zinc oxide (ZnO) and Aluminum doped zinc oxide (AZO) with 20 nm thick were fabricated at 300 K on glass and Polyethylene terephthalate (PET) substrates by means of directcurrent sputtering method. The…
Changes in crystalline phases resulting from low-temperature ageing of different yttria doped and non-doped zirconia-toughened alumina composites and nanocomposites were investigated under controlled humidity and temperature conditions in…
The current work studies the effect of sintering conditions on the densification behavior, microstructure, and electrochemical performance of 6 mol% Sc2O3, 1 mol% CeO2 co-doped ZrO2 (6Sc1CeZr) for solid-state electrolyte applications. The…
We report in situ characterized TiO2 thin-films deposited on optical fiber, having thicknesses in the 20-100nm range, and having enhanced conductivity values of 700S/cm upon interacting with hydrogen. This conductivity was achieved in pure…
We investigate the effect of annealing temperature on the crystalline structure and physical properties of tantalum-pentoxide films grown by radio frequency magnetron sputtering. For this purpose, several tantalum films were deposited and…
Al-doped ZnO thin films were deposited using reactive high power impulse magnetron sputtering at substrate temperatures between room temperature and 600 $\bullet$ C. Two sample series with different oxygen partial pressures were studied.…
The authors have shown that nanogranular indium tin oxide (ITO) films, deposited by spray pyrolysis on silicon substrate, demonstrate ultralow thermal conductivity ~ 0.84 +/-0.12 Wm-1K-1 at room temperature. This value is approximately by…
Internal friction in oxide thin films imposes a critical limitation to the sensitivity and stability of ultra-high finesse optical cavities for gravitational wave detectors. Strategies like doping or creating nanolaminates are sought to…