Related papers: Yield strength insensitivity in a dual-phase high …
The induction hardening behavior of a new, hot-rolled 0.4 wt.% carbon steel with the two different starting microstructures of upper and lower bainite has been simulated using a Gleeble 3800. The effect of heating rate in the range 1 - 500…
Soft materials capable of large inelastic deformation play an essential role in high-performance nacre-inspired architectured materials with a combination of stiffness, strength and toughness. The rigid "building blocks" made from glass or…
Recent observations of jerky flow in high-entropy alloys (HEA) revealed a high role of self-organization of dislocations in their plasticity. The present work reports first results of investigation of stress fluctuations during plastic…
The CrMnFeCoNi high-entropy alloy is highly printable and holds great potential for structural applications. However, no significant discussions on cyclic plasticity and fatigue damage in previous studies. This study provides significant…
Twenty-one distinct AlxCoCrFeNi alloys were rapidly prepared by laser alloying an equiatomic CoCrFeNi substrate with Al powder to create an alloy library ranging x=0.15-1.32. Variations in crystal structure, microstructure and mechanical…
High-entropy alloys (HEAs), and even medium-entropy alloys (MEAs), are an intriguing class of materials in that structure and property relations can be controlled via alloying and chemical disorder over wide ranges in the composition space.…
This study focuses on the microstructure's evolution upon different aging conditions of a high-strength low-density steel with a composition of Fe-28Mn-9Al-1C. The steel is hot-rolled, subsequently quenched without any solution treatment,…
Two ingots weighing 400 g and 5 kg with nominal compositions of Fe-8Mn-4Al-2Si-0.5C-0.07V-0.05Sn were produced to investigate the effect of processing variables on microstructure development. The larger casting has a cooling rate more…
The crystal structure and magnetic properties of MnCoxFe1-xSi (x=0-0.5) compounds were investigated. With increasing Fe content, the unit cell changes anisotropically and the magnetic property evolves gradually: Curie temperature decreases…
This work investigated the effects of aging heat treatments on the microstructure and, consequently, the quasi-static (tensile properties) and dynamic (impact toughness) mechanical behaviour of a 17-4 PH stainless steel produced by powder…
The crystal structure and magnetoresponsive properties of Fe-doped MnCoGe alloys have been investigated using x-ray diffraction (XRD) and magnetic measurements. By alloying the Fe-containing isostructure compounds into MnCoGe, a…
Microstructural features and mechanical properties of an Al-Mg-Si alloy processed by high-pressure torsion have been investigated using transmission electron microscopy, X-ray diffraction, three-dimensional atom probe, tensile tests and…
Besides permitting an accurate determination of the ferromagnetic-to-paramagnetic phase transition temperature and the characteristic temperatures for the beginning and end of the growth of martensite (austenite) phase at the expense of…
In this work, the evolution of nanomechanical properties was studied systematically as a function of temperature, chemical, and microstructural complexity of different Fe-based alloys. Experiments were performed at different temperatures…
Deformation heterogeneities within microstructures of polycrystalline shape memory alloys (SMAs) during superelastic stressing are studied using both experiments and simulations. In situ X-ray diffraction, specifically the far-field high…
We have carried out plastic deformation experiments on single-phase samples of the body centered ZrNbTiVHf high-entropy alloy between room temperature and 1150 K. The experiments were carried out on polycrystalline samples with two…
Medium- and high-entropy alloys based on the CrCoNi-system have been shown to display outstanding strength, tensile ductility and fracture toughness (damage-tolerance properties), especially at cryogenic temperatures. Here we examine the…
The present work deals with the microstructure and texture evolutions of a TWIP high entropy alloy at various temperatures. Toward this end, the tensile tests were conducted at temperatures ranging from 298 to 873 K under the strain rate of…
Transformation induced plasticity (TRIP) behavior was studied in steel with composition Fe-0.07C-2.85Si-15.3Mn-2.4Al-0.017N that exhibited two TRIP mechanisms. The initial microstructure consisted of both {\epsilon}- and…
We have synthesized a nominal composition of Ni50Mn30Sn20 alloy using arc melting technique. Rietveld refinement confirms the austenite L21 structure in Fm-3m space group. Electrical resistivity has been found to clearly exhibiting two…