Related papers: Creep-fatigue interactions in a polycrystalline st…
Stress corrosion cracking (SCC) is a form of failure in metals that is present mostly in systems where humidity contact and mechanical load play a key role. Therefore, prediction of the combined effect is desired. There are models based on…
We study the creep behavior of a disordered brittle material (concrete) under successive loading steps, using acoustic emission and ultrasonic sensing to track internal damage. The primary creep rate is observed to follow a (Omori-type)…
The hysteresis or internal friction in the deformation of crystalline solids stressed cyclically is studied from the viewpoint of collective dislocation dynamics. Stress-controlled simulations of a dislocation dynamics model at various…
From soft polymeric gels to hardened cement paste, amorphous solids under constant load exhibit a pronounced time-dependent deformation called creep. The microscopic mechanism of such a phenomenon is poorly understood in amorphous materials…
The creep behaviour of a creep-resistant AE42 magnesium alloy reinforced with Saffil short fibres and SiC particulates in various combinations has been examined in the longitudinal direction, i.e., the plane containing random fibre…
The nonequilibrium dynamics of diffusion-mediated plasticity and creep in materials subjected to constant load at high homologous temperatures is studied atomistically using Phase Field Crystal (PFC) methods. Creep stress and grain size…
Iron is a candidate to replace cobalt in WC hardmetals, due to its lower cost and toxicity. A WC-FeCr hardmetal was compression tested at 900-1200 {\deg}C. Particular attention is paid to the steady-state creep rates and stress-exponents…
Predicting potential risks associated with the fatigue of key structural components is crucial in engineering design. However, fatigue often involves entangled complexities of material microstructures and service conditions, making…
Quasi-brittle materials endowed with (statistically) self-similar hierarcical microstructures show distinct failure patterns that deviate from the standard scenario of damage accumulation followed by crack nucleation-and-growth. Here we…
The work deals with the fatigue lifetime estimation of Short Fiber Reinforced Thermoplastics (SFRP), with a focus on conjugated effects of thermal aging. Two materials containing 35% (V35) and 50% (V50) weight ratio of short glass fibers…
The reporting and evaluation of creep tests of concrete is complicated by the fact that creep is significant even for the shortest observable load durations. Compared to the strain after 0.1 s load duration, the strain at 2 hour duration is…
Finite element analysis of stress about a blunt crack tip, emphasizing finite strain and phenomenological and mechanism-based strain gradient plasticity (SGP) formulations, is integrated with electrochemical assessment of occluded-crack tip…
Creep in single crystal Nickel-based superalloys has been a topic of interest since decades, and nowadays simulations are more and more able to complement experiments. In these alloys, the $\gamma/\gamma'$ phase microstructure co-evolves…
Understanding the creep mechanisms and deformation response at different stresses and temperatures is crucial for design using nickel-base superalloys for high-temperature applications. In this study, the creep behaviour of a newly designed…
Molecular dynamics (MD) simulations have been performed to investigate the fatigue deformation behaviour of polycrystalline Cu with grain size of 5.4 nm. The samples were prepared using Voronoi algorithm with random grain orientations.…
Current seismic design codes primarily rely on the strength and displacement capacity of structural members and do not account for the influence of the ground motion duration or the hysteretic behavior characteristics. The energy-based…
The accumulation of plastic deformation and flow localization in amorphous alloys under periodic shear are investigated using molecular dynamics simulations. We study a well-annealed binary mixture of one million atoms subjected to…
Polymer-based plastics exhibit time-dependent deformation under constant stress, known as creep, which can lead to rupture or static fatigue. A common misconception is that materials under tolerable static loads remain unaffected over time.…
Strain-controlled fatigue of Mg-1Mn-0.5Nd (wt.\%) alloy were studied by experiment and simulation. The microstructure was made up of a dispersion of strongly texture grains (13\%) embedded in a matrix of grains with a random texture. The…
A subcritical load on a disordered material can induce creep damage. The creep rate in this case exhibits three temporal regimes viz. an initial decelerating regime followed by a steady-state regime and a stage of accelerating creep that…