Related papers: Design of the Single Balanced Mixer (Using HSMS-28…
The present work consists of designing a Single Balanced Mixer(SBM) with the 65 nm CMOS technology, this for a 1.9 GHz RF channel, dedicated to wireless applications. This paper shows; the polarization chosen for this structure, models of…
We present a 380-520 GHz balanced superconductor-insulator-superconductor (SIS) mixer on a single silicon substrate. All radio-frequency (RF) circuit components are fabricated on a $9 \mu$m thick membrane. The intermediate frequency (IF) is…
This letter presents an experimental characterization technique for assessing the performance of terahertz harmonic mixers across a wide frequency range. The total signal transfer loss of three mixers was measured in both up- and…
This report describes the design and proposal of a wireless link capable of broadcasting at 1 Gbps. For this application, isotropic antennas, 256 QAM modulation, and BER level less than 1e-5, without using error correction coding, were…
A dual-polarization balanced superconductor-insulator-superconductor mixer operating at 2 mm wavelength is realized in form of a monolithic planar integrated circuit. Planar orthomode transducers and LO couplers are enabled by using silicon…
By configuring a radio-frequency single-electron transistor as a mixer, we demonstrate a unique implementation of this device, that achieves good charge sensitivity with large bandwidth about a tunable center frequency. In our…
We report on balanced SIS receivers covering the astronomical important 180-720 GHz submillimeter atmospheric window. To facilitate remote observations and automated spectral line surveys, fully synthesized local oscillators are employed.…
This article presents a heterodyne experiment which uses a 380-520 GHz planar circuit balanced Nb-$\mathrm{Al_2O_3}$-Nb superconductor-insulator-superconductor (SIS) quasiparticle mixer with 4-8 GHz instantaneous intermediate frequency (IF)…
A 25-40GHz passive mixer-first receiver using a novel architecture for digital beamforming arrays is proposed. The architecture uses a novel technique for impedance matching using the on-resistance of the mixers in the receiver and matching…
An 8 x 8 mixed-signal matrix multiplier architecture based on 64 hybrid capacitor-resistor multiplying digital to analogue converters implemented in a 65 nm CMOS technology was developed for the application of blind source separation of…
This work presents an experimental study of Single Input Multiple Output (SIMO) channel performance in indoor radio propagation environment. Indoor channel measurements at 2.4 GHz ISM frequency band have been performed using a versatile…
Efficient and compact frequency converters are essential for frequency stabilization of terahertz sources. In this paper, we present a 3.5-THz, x6-harmonic, integrated Schottky diode mixer operating at room temperature. The designed…
The recent proliferation of personal wireless communication devices is driving the need for multi-band frequency selective components including multiplexers and dual-band filters. This paper presents a simple technique for transforming a…
In this paper, a rectangular-shaped power divider has been presented operating at 27.9 GHz. The power divider has achieved acceptable results for important parameters such as S11, S12, S21, and S22. The substrate employed for the power…
We demonstrate ultra-broadband optoelectronic mixing of frequency combs that provides phase-coherent detection of a repetition frequency up to 500 GHz, using a high-speed modified uni-traveling carrier (MUTC) photodiode. Nonlinear…
Reconfigurable Intelligent Surfaces (RISs) exhibit promising enhancements in coverage and data rates for wireless communication systems, particularly in the context of 5G and beyond. This paper introduces a novel approach by focusing on the…
This paper presents the design and implementation of a simple, single-layer, broadband (97%, 11.3-32.3 GHz) Radar Cross Section Reduction (RCSR) Modulated Surface (MS). It uses modulation of the edge-length of the square patch (SP)…
A hemispherical multilayer wide-band (7-13 GHz) band-pass frequency selective surface (FSS) is reported. A new design technique based on a Goldberg discretization and unit cell scaling technique is introduced to accommodate the curved…
Millimeter-wave multi-input multi-output (mm-Wave MIMO) systems are one of the candidate schemes for 5G wireless standardization efforts. In this context, the main contributions of this article are three-fold. 1) We describe parallel sets…
We have developed a wideband receiver system for simultaneous observations in CO lines of J = 2-1 and J = 3-2 transitions using the Osaka 1.85-m mm-submm telescope. As a frequency separation system, we developed multiplexers that connect…