Related papers: Depth resolution optimized sputter depth profiling…
Spectroscopic ellipsometry is a powerful method with high surface sensitivity that can be used to monitor the growth of even sub-monolayer film. However, the analysis of ultrathin films is complicated by the correlation of the dielectric…
In the present work, ultrathin films of Zinc oxide (ZnO) and Aluminum doped zinc oxide (AZO) with 20 nm thick were fabricated at 300 K on glass and Polyethylene terephthalate (PET) substrates by means of directcurrent sputtering method. The…
Auger analysis of high-aspect ratio contact holes of integrated microelectronic devices is a challenging analytical task. Due to geometrical shadowing the primary electron beam and the energy analyser have not the required direct line of…
Semiconductor detector fabrication technologies developed decades ago are widely employed today to produce gamma-ray detectors from large volume, single crystals of high purity Ge (HPGe). Most all of these detectors are used exclusively for…
Photothermal-Induced Resonance (PTIR) spectroscopy and imaging with infrared light has seen increasing application in molecular spectroscopy of biological samples. The appeal of the technique lies in its capability to provide information…
Grazing incidence X-ray diffraction (GIXD) is widely used for the structural characterization of thin films, particularly for analyzing phase composition and the orientation distribution of crystallites. While various tools exist for…
Design details of a 127 degree electrostatic cylindrical spectrometer equipped with a position-sensitive micro-channel plate detector for measuring the sputtered ions in collisions of highly charged ions with solid surface is described. The…
By studying the temperature-dependent behavior of electron thermal conductivity (k) in a 3.2 nm-thin film, we quantify the extremely confined defect-electron scattering and reveal the intrinsic phonon-electron scattering that is shared by…
Nanoscale surface analysis of 1 micrometer thick high entropy alloys (HEAs) was carried out using nano-IR for hyperspectral imaging and single point spectroscopy in the 700-1700 1/cm spectral range. Nano-IR is based on the detection of…
The influence of edge roughness in angle resolved scatterometry at periodically structured surfaces is investigated. A good description of the radiation interaction with structured surfaces is crucial for the understanding of optical…
To design semiconductor-based optical devices, the optical properties of the used semiconductor materials must be precisely measured over a large band. Transmission spectroscopy stands out as an inexpensive and widely available method for…
Visible photonic integrated circuits underpin applications ranging from AR/VR to quantum control, yet lack a high-resolution, nondestructive diagnostic comparable to the optical frequency-domain reflectometry used in infrared silicon…
We carried out simulations of crystal truncation rod (CTR) scatterings, i.e., one of the surface X-ray diffraction techniques with atomic resolution, from a monolayer He film adsorbed on graphite. Our simulations reveal that the 00L rod…
We describe a high resolution imaging detector based on a single 80 mm micro-channel-plate (MCP) and a phosphor screen mounted on a UHV flange of only 100 mm inner diameter. It relies on standard components and we describe its performance…
The structure of an adsorption octadecanamide film at the planar toluene-water interface is studied by X-ray reflectometry using synchrotron radiation with photon energy of 15 keV. The electron density (polarizability) profiles, according…
Photothermal-Induced Resonance (PTIR) is increasingly used in the measurement of infrared absorption spectra of sub-micrometer objects. The technique measures IR absorption spectra by relying on the photothermal effect induced by a rapid…
Thin films of inorganic materials as Tin-doped indium oxide, titanium oxide, Niobium doped titanium oxide, were deposited for comparison on glass and Polyethylene terephthalate (PET) substrates with a DC sputtering method. These thin films…
The scattering of light observed through the turbid underwater channel is often regarded as the leading challenge when designing underwater electro-optical imaging systems. There have been many approaches to address the effects of…
Thin films of functional inorganic materials, particularly oxides, play a vital role in optoelectronics, enabling applications that range from active optical components to MEMS-based architectures. Achieving high aspect ratio patterning of…
Focused ion beams (FIBs) are widely used in nanofabrication for applications such as circuit repair, ultra-thin lamella preparation, strain engineering, and quantum device prototyping. Although the lateral spread of the ion beam is often…