Related papers: Dual on-chip SQUID measurement protocol for flux d…
A superconducting quantum magnetometer based on magnetic flux-driven modulation of the density of states of a proximized metallic nanowire is theoretically analyzed. With optimized geometrical and material parameters transfer functions up…
We designed and fabricated a new type of superconducting quantum interference device (SQUID) susceptometers for magnetic imaging of quantum materials. The 2-junction SQUID sensors employ 3D Nb nano-bridges fabricated using electron beam…
The excellent sensitivities of quantum sensors are a double-edged sword: minuscule quantities can be observed, but any undesired signal acts as noise. This is challenging when detecting quantities that are obscured by such noise. Decoupling…
Spins are prototypical systems with the potential to probe magnetic fields down to the atomic scale limit. Exploiting their quantum nature through appropriate sensing protocols allows to enlarge their applicability to fields not always…
On-chip magnets can be used to implement relatively large local magnetic field gradients in na- noelectronic circuits. Such field gradients provide possibilities for all-electrical control of electron spin-qubits where important coupling…
We develop a high speed on-chip flux measurement using a capacitively shunted SQUID as an embedded cryogenic transducer and apply this technique to the qualification of a near-term scalable printed circuit board (PCB) package for frequency…
A superconducting quantum interference device with differential output or "DSQUID" was proposed earlier for operation in the presence of large common-mode signals. The DSQUID is the differential connection of two identical SQUIDs. Here we…
We have developed a novel dc SQUID system with a micro-coil input circuit to act as a local probe of quantum matter and nanosystems. The planar niobium micro-coil pickup loop is located remotely from the SQUID, coupled through a…
We have designed and characterized a micro-SQUID with dispersive readout for use in low temperature scanning probe microscopy systems. The design features a capacitively shunted RF SQUID with a tunable resonance frequency from 5 to 12 GHz,…
Superconducting quantum interference devices (SQUIDs) are state-of-the-art in ultra-sensitive magnetometry; however, conventional SQUID devices are fundamentally limited by the inherently nonlinear and periodic nature of their transfer…
An increasing number of experiments require the use of ultrasensitive nanomechanical resonators. Relevant examples are the investigation of quantum effects in mechanical systems [1] or the detection of exceedingly small forces as in…
Scanning Superconducting Quantum Interference Device (SQUID) Susceptometry simultaneously images the local magnetic fields and susceptibilities above a sample with sub-micron spatial resolution. Further development of this technique…
We report on a scanned superconducting quantum interference device (SQUID) microscope operating in a cryogen-free cryostat, with the capability of up to forty RF connections with 20 GHz bandwidth to a device under test. The system utilizes…
High-sensitivity magnetometry is of critical importance to the fields of biomagnetism and geomagnetism. However, the magnetometry for the low-frequency signal detection meets the challenge of sensitivity improvement, due to multiple types…
Torque magnetometry is a key method to measure the magnetic anisotropy and quantum oscillations in metals. In order to resolve quantum oscillations in sub-millimeter sized samples, piezo-electric micro-cantilevers were introduced. In the…
We characterize the flux sensitivity of a dispersive 3D aluminum nanobridge SQUID magnetometer as a function of applied in-plane magnetic field. In zero field, we observe an effective flux noise of 17 n$\Phi_0$/Hz$^{1/2}$ with 25 MHz of…
A bismuth-doped silicon substrate was analyzed by using a magnetometer based on a superconducting flux qubit. The temperature dependence of the magnetization indicates that the silicon substrate contains at least two signal sources,…
DC measurements are made in a superconducting, persistent current qubit structure with a time-ordered meter. The persistent-current qubit has a double-well potential, with the two minima corresponding to magnetization states of opposite…
We present the design and construction of a SQUID-based magnetometer for operation down to temperatures T = 10 mK, while retaining the compatibility with the sample holders typically used in commercial SQUID magnetometers. The system is…
This paper presents the design and implementation of a magnetic signal scanning and imaging system based on the giant magnetoimpedance (GMI) effect. The system employs a pair of performance-matched GMI sensing elements configured as a…