Related papers: Status of a point-like neutron generator developme…
Neutron imaging is one of the key technologies for non-destructive transmission testing. Recent progress in the development of intensive neutron sources allows us to perform energy-resolved neutron imaging with high spatial resolution.…
A new method for directional fast neutron detection is proposed based on a neutron time projection chamber (TPC) and position-sensitive plastic scintillation detectors. The detection system can efficiently locate the approximate location of…
We describe the beam characteristics of the first ballistic supermirror neutron guide H113 that feeds the neutron user facility for particle physics PF1B of the Institute Laue-Langevin, Grenoble (ILL). At present, the neutron capture flux…
Focused ion beams (FIBs) are widely used in nanofabrication for applications such as circuit repair, ultra-thin lamella preparation, strain engineering, and quantum device prototyping. Although the lateral spread of the ion beam is often…
The development of compact neutron sources for applications is extensive and features many approaches. Let alone ion-based approaches, several projects with different parameters exist. This article focuses on ion-based neutron production…
Two full rotating gantry with different nozzles (Multipurpose nozzle with MLC, Scanning Dedicated nozzle) with conventional cyclotron system is installed and under commissioning for various proton treatment options at Samsung Medical Center…
A new ion source will be prepared for the CYCLONE30 commercial cyclotron with a much advanced performance compared with the previous one. The newly designed ion source has a very large transparency without deteriorating the beam optics,…
The cyclotron designed for the IsoDAR neutrino source represents a paradigm shift in cyclotron performance -- a factor of 10 increase in beam current. This performance is required to develop a neutrino source of sufficient strength for…
In this paper we examine the puzzle of neutron formation in atmospheric discharge. While conventional explanation relies on photonuclear reactions, voltages used to recreate such discharges in the lab (1 MV) are thought to be not high…
We demonstrate a prototype of a Focused Ion Beam machine based on the ionization of a laser-cooled cesium beam adapted for imaging and modifying different surfaces in the few-tens nanometer range. Efficient atomic ionization is obtained by…
A compact Liquid-Lithium Target (LiLiT) was built and tested with a high-power electron gun at Soreq Nuclear Research Center. The lithium target, to be bombarded by the high-intensity proton beam of the Soreq Applied Research Accelerator…
To greatly enhance output of fusion-produced neutrons in a laser-initiated Coulomb explosion of $D$ clusters, we propose to accelerate $D^+$ ions by an electrical pulse to the energies where the $D^+ + D$ collision cross-section is the…
Technetium-99m ($^{99m}$Tc) is essential to more than 16 million diagnostic procedures performed annually in the United States. It is typically acquired on-site from generators containing $^{99}$Mo, in turn produced at nuclear reactor…
One of the fundamental challenges for future leptonic colliders and neutrino factories as well as for high-sensitivity studies of lepton universality is to design and construct new high-intensity sources of muons and positrons. The…
In the framework of research on IVth generation reactors and high intensity neutron sources a low-power prototype neutron amplifier was recently proposed by INFN. It is based on a low-energy, high current proton cyclotron, whose beam,…
We have demonstrated the feasibility of performing high-frame-rate, fast neutron radiography of air-water two-phase flows in a thin channel with rectangular cross section. The experiments have been carried out at the accelerator facility of…
In this work, we have developed and characterized a position-sensitive CLYC detector that acts as the neutron imaging layer and $\gamma$-ray Compton scatterer of the novel dual \g-ray and neutron imaging system GN-Vision, which aims at…
A source of high-energy photons, ions, and positrons can be attained with the interaction of ultra-intense femtosecond laser pulses with advanced nanostructured targets. We present and characterise a numerical model that mimics the foam…
In recent years, the interest in high intensity proton beams in excess of several milli-Amperes has risen. Potential applications are in neutrino physics, materials and energy research, and isotope production. Continuous wave proton beams…
Neutrons serve as unique probes for exploring the microscopic structure of matter, with the performance of a neutron source fundamentally governing the depth of scientific exploration and the breadth of industrial applicability. To address…