Related papers: Nanometer-Scale Deformations of Berea Sandstone un…
Stability of lubricating fluid infused slippery surfaces is a concern for scientists and engineers and attempts are being made for its improvement. Lubricating oil coated slippery surface for aqueous drops is one of the important candidates…
The linear stability analysis of the equations governing the evolution of a flat sand bed submitted to a turbulent shear flow predicts that the wavelength $\lambda$ at which the bed destabilises to form dunes should scale with the drag…
We use a mesoscopic computer simulation method to study the interplay between hydrodynamic and Brownian fluctuations during steady-state sedimentation of hard sphere particles for Peclet numbers (Pe) ranging from 0.1 to 15. Even when the…
The increase in moment of inertia of SF$_6$ in helium nanodroplets is calculated using the quantum hydrodynamic approach. This required an extension of the numerical solution to the hydrodynamic equation to three explicit dimensions. Based…
From soft polymeric gels to hardened cement paste, amorphous solids under constant load exhibit a pronounced time-dependent deformation called creep. The microscopic mechanism of such a phenomenon is poorly understood in amorphous materials…
Reactions at solid-water interfaces play a foundational role in water treatment systems, catalysis, chemical separations, and in predicting chemical fate and transport in the environment. Over the last century, experimental measurements and…
Particle suspensions, present in many natural and industrial settings, typically contain aggregates or other microstructures that can complicate macroscopic flow behaviors and damage processing equipment. Recent work found that applying…
Molecular dynamics studies of nono-sized rigid grains, droplets and bubbles in nano-sized pores indicate that the drag force may have a hydrodynamic form if the moving object is dense and small compared to the pore diameter. Otherwise, the…
The global commitment to achieve net-zero has led to increasing investment towards the production and usage of green hydrogen (H2).However, the massive quantity needed to match future demand will require new storage facilities. Underground…
In layered materials, a common mode of deformation involves buckling of the layers under tensile deformation in the direction perpendicular to the layers. The instability mechanism, which operates in elastic materials from geological to…
The structural evolution of suspensions upon freezing is studied with optical microscopy in a suspended droplet configuration. Droplets have millimeter size and consist in an aqueous mixture of silica particles while the surroundings phase…
In the present study, molecular dynamics (MD) simulations have been performed to understand the effect of nanowire size, temperature and strain rate on the variations in dislocation density and deformation mechanisms in $<$100$>$ Cu…
The instability and periodic deformation of bilayer membranes during freezing processes are studied as a function of the difference of the shape energy between the high and the low temperature membrane states. It is shown that there exists…
The method of formation of nanoparticle aggregates such as high-coverage spherical shells of microspheres or 3-D micro crystals grown in the geometry unaffected by a substrate is described. In the reported experiment, the evaporation of…
Nanoindentation techniques recently developed to measure the mechanical response of crystals under external loading conditions reveal new phenomena upon decreasing sample size below the microscale. At small length scales, material…
Capillary effects such as imbibition-drying cycles impact the mechanics of granular systems over time. A multiscale poromechanics framework was applied to cement paste, that is the most common building material, experiencing broad humidity…
The mechanical behaviour of porous sandstones is generally modelled using concepts from granular mechanics, often overlooking the effect of cementation. To probe the key differences between sand and sandstone mechanics, we performed…
As a droplet impacts on a granular substrate, both the intruder and the target deform, during which the liquid may penetrate into the substrate. {These three aspects together distinguish} it from other impact phenomena in the literature. We…
We introduce a computational approach to estimate the hardness and stiffness of diamond surfaces and nanoparticles by studying their elastic response to atomic nanoindentation. Results of our ab initio density functional calculations…
Bulk nanocrystalline materials of small and medium ferromagnetic content were produced using severe plastic deformation by high-pressure torsion at roomtemperature. Giant magnetoresistive behavior was found for as deformed materials, which…