Related papers: Nanometer-Scale Deformations of Berea Sandstone un…
Nanoscale confinement of molecules in a fluid can result in enhanced viscosity, local fluidic order, or collective motion. Confinement also affects ion transport and/or the rate and equilibrium concentration in a chemical reaction, all of…
During plastic deformation of granular materials due to loading, the stress-strain and strength characteristics of sand grains are influenced with grain size, their distribution and packing. Also the macroscopic behaviour of granular…
Subsurface storage of CO2 is predicted to rise exponentially in response to the increasing levels of CO2 in the atmosphere. Large-scale CO2 injections into the subsurface require understanding of the potential for fluid flow through faults…
The rate of water flow through hydrophobic nanocapillaries is greatly enhanced as compared to that expected from macroscopic hydrodynamics. This phenomenon is usually described in terms of a relatively large slip length, which is in turn…
Values of water permeability for cementitious materials reported in the literature show a large scatter. This is partially attributed to the fact that materials used in different studies are different. To eliminate the effects of cements,…
We study the response of materials with nanoscale pores containing sodium chloride solutions, to cycles of relative humidity (RH). Compared to pure fluids, we show that these sorption isotherms display much wider hysteresis, with a shape…
The dewetting of thin nanofilms is significantly impacted by thermal fluctuations, liquid-solid slip, and disjoining pressure, which can be described by lubrication equations augmented by appropriately scaled noise terms, known as…
When sheets of layered material like C, WS$_2$ or BN are restricted to finite sizes, they generally form single- and multi-walled hollow nanoparticles in order to avoid dangling bonds. Using continuum approaches to model elastic deformation…
Researchers are currently exploring nanoporous two-dimensional materials, such as hexagonal boron nitride (hBN), as potential desalination membranes. Here, we study the effect of grain boundaries (GBs) and interfacial electrostatic…
Experimental acoustic laboratory measurement methods for hydrate-bearing poroelastic solid media are biefly reviewed. A measurement example using the Fourier spectrum method is given, for compressional and shear wave velocities in…
A novel method utilizing Fast Neutron Resonance Transmission Radiography is proposed for rapid, non-destructive and quantitative determination of the weight fractions of oil and water in cores taken from subterranean or underwater…
Nanocrystalline metals, i.e. metals in which the grain size is in the nanometer range, have a range of technologically interesting properties including increased hardness and yield strength. We present atomic-scale simulations of the…
Soft particles suspended in fluids flowing through microchannels are often encountered in biological flows such as cells in vessels. They can deform under flow or when subject to mechanical stresses as they interact with themselves.…
We consider the theoretical description of a fluid adsorbed in a nanopore. Hysteresis and discontinuities in the isotherms in general hampers the determination of equilibrium thermodynamic properties, even in computer simulations. A…
When an object impacts onto a bed of very loose, fine sand, the drag it experiences depends on the ambient pressure in a surprising way: Drag is found to increase significantly with decreasing pressure. We use a modified penetrometer…
Quantitative density measurements from electron scattering show that shear bands in deformed Al_{88}Y_{7}Fe_{5} metallic glass exhibit alternating high and low density regions, ranging from -9 % to +6 % relative to the un-deformed matrix.…
Rates of aggregation of dodecane-in-water (d/w) nanoemulsions stabilized with 7.5 mM sodium dodecylsulfate (SDS) are evaluated beyond 500 mM NaCl. As in the case of hexadecane-in-water (h/w) emulsions, it is found that flocculation rates…
Quasi-2D experiments of a submerged sediment layer creeping downward were performed, varying the channel tilt and a porous flow under the respective thresholds for yielding. Logarithmic decay rates of the deformation are observed, with the…
Solid-state nanofoaming experiments are conducted on two PMMA grades of markedly different molecular weight using CO$_2$ as the blowing agent. The sensitivity of porosity to foaming time and foaming temperature is measured. Also, the…
Creep deformation in shale rocks is an important factor in many applications, such as the sustainability of geostructures, wellbore stability, evaluation of land subsidence, CO2 storage, toxic waste containment, and hydraulic fracturing.…