Related papers: Development of Multi-Layer Fabrication Process for…
A new fabrication process for superconducting integrated digital circuits is reported. We have developed the "SIMIT Nb04" fabrication technique for superconducting integrated circuits with Nb-based Josephson junctions based on the validated…
To increase density of superconductor digital and neuromorphic circuits by 10x and reach integration scale of $10^8$ Josephson junctions (JJs) per chip, we developed a new fabrication process on 200-mm wafers, using self-shunted…
We review the salient features of two advanced nodes of an 8-Nb-layer fully planarized process developed recently at MIT Lincoln Laboratory for fabricating Single Flux Quantum(SFQ) digital circuits with very large scale integration on…
We implemented, optimized and fully tested over multiple runs a superconducting Josephson junction fabrication process tailored for the integrated digital circuits that are used for control and readout of superconducting qubits operating at…
Recent progress in superconductor electronics fabrication has enabled single-flux-quantum (SFQ) digital circuits with close to one million Josephson junctions (JJs) on 1-cm$^2$ chips. Increasing the integration scale further is challenging…
We present our new fabrication Process for Superconductor Electronics (PSE2) that integrates two (2) layers of Josephson junctions in a fully planarized multilayer process on 200-mm wafers. The two junction layers can be, e.g., conventional…
We are developing a superconductor electronics fabrication process with up to nine planarized superconducting layers, stackable stud vias, self-shunted Nb/AlOx-Al/Nb Josephson junctions, and one layer of MoNx kinetic inductors. The minimum…
A fabrication process for Nb/Al-AlOx/Nb Josephson junctions (JJs) with sizes down to 200 nm has been developed on a 200-mm-wafer tool set typical for CMOS foundry. This process is the core of several nodes of a roadmap for fully-planarized…
In order to integrate superconducting qubits with rapid-single-flux-quantum (RSFQ) control circuitry, it is necessary to develop a fabrication process that fulfills at the same time the requirements of both elements: low critical current…
We report the realization of multilayer three-dimensional nanobridge Josephson junctions based on Nb/NbN and Nb/TiN superconducting stacks fabricated using electron-beam lithography and chlorine-based dry etching. In this architecture, a…
The most commonly used physical realization of superconducting qubits for quantum circuits is a transmon. There are a number of superconducting quantum circuits applications, where Josephson junction critical current reproducibility over a…
To increase integration scale of superconductor electronics, we are developing a new, SFQ7ee, node of the fabrication process at MIT Lincoln Laboratory. In comparison to the existing SFQ5ee node, we increased the number of fully planarized…
Using a fully automated cryogenic wafer prober, we measured superconductor fabrication process control monitors and simple integrated circuits on 200 mm wafers at 4.4 K, including SQIF-based magnetic field sensors, SQUID-based circuits for…
We have developed a combined photolithography and electron-beam lithography fabrication process for sub-\mum to \mum-size Nb/Al-AlOx/Nb Josephson junctions. In order to define the junction size and protect its top electrode during anodic…
We investigated current-voltage characteristics of unshunted and externally shunted Josephson junctions (JJs) with high critical current densities, Jc, in order to extract their basic parameters and statistical characteristics for JJ…
Superconductor-insulator-ferromagnet-superconductor (SIFS) Josephson tunnel junctions based on Nb\Al2O3\Ni\Cu\Nb stacks with a thickness step in the metallic NiCu interlayer were fabricated. The step height of a few 0.1 nm was defined by…
For high-performance superconducting quantum devices based on Josephson junctions (JJs) decreasing lateral sizes is of great importance. Fabrication of sub-\mu m JJs is challenging due to non-flat surfaces with step heights of up to several…
Currently, superconductor digital integrated circuits fabricated at HYPRES, Inc. can operate at clock frequencies of ~ 40 GHz. The circuits present multilayered structures containing tens of thousands of Nb/Al/AlOx/Nb Josephson junctions…
Motivated by recent progress in development of cryogenic memory compatible with single flux quantum (SFQ) circuits we have performed a theoretical study of magnetic SIsFS Josephson junctions, where 'S' is a bulk superconductor, 's' is a…
We report on experimental studies of superconducting coupling through a thin Ni76Al24 film. A new patterning process has been developed, which allows in combination with the wedge shaped deposition technique the in situ deposition of 20…