Related papers: Solvent Engineered Synthesis of Layered SnO Nanopa…
Silicon offers great promise as a potential anode active material and the optimum alternative to lithium metal in all-solid-state lithium-ion batteries. However, its practical application is limited by severe volume expansion (~300%) during…
Oxidative decomposition of organic-solvent-based liquid electrolytes at cathode material interfaces has been identified as a main reason for rapid capacity fade in high-voltage lithium ion batteries. The evolution of "cathode electrolyte…
Sodium-titanate \ce{Na2Ti3O7} (NTO) is regarded as a highly promising anode material with a very low voltage for Na-ion batteries and capacitors, but suffered from relatively low specific capacity and poor electron conductivity. Here we…
Developing efficient anode materials with low electrode voltage, high specific capacity and superior rate capability is urgently required on the road to commercially viable sodium-ion batteries (SIBs). Aiming at finding a new SIB anode…
The electrochemical deposition of ZnO hierarchical nanostructures directly from PHEMA hydrogel coated electrodes has been successfully demonstrated. A variety of hierarchical ZnO nanostructures, including porous nanoflakes, nanosheets and…
All-solid-state batteries (ASSBs) offer a promising route to safer batteries with superior energy density compared to conventional Li-ion batteries (LIBs). However, the design of the composite cathode and optimization of the underlying…
Sodium-ion batteries (SIBs) have received significant attention as promising alternative for energy storage applications owing to the large availability and low cost of sodium. In this paper we study the electrochemical behavior of…
Two-dimensional (2D) materials as electrodes is believed to be the trend for future Li-ion and Na-ion batteries technologies. Here, by using first-principles methods, we predict that the recently reported borophene (2D born sheet) can serve…
The technology of silicon anodes appears to be reaching maturity, with high-energy Si cells already in pilot-scale production. However, the performance of these systems can be difficult to replicate in academic settings, making it…
We report a comprehensive study on the electrochemical performance of four different Transition Metal Oxides encapsulated inside carbon nanotubes (CNT). Irrespective of the type of oxide-encapsulate, all these samples exhibit superior…
Hard carbons show significant promise as anode materials for sodium-ion batteries. However, monitoring the sodiation process in the hard carbon electrode during cycling and understanding the sodiation mechanism remain challenging. This…
We report the electrochemical performance of nanostructures of Na$_{0.66}$V$_4$O$_{10}$ as cathode material for rechargeable batteries. The Rietveld refinement of room temperature x-ray diffraction pattern shows the monoclinic phase with…
An important objective of designing lithium-ion rechargeable battery cells is to maximize their rate performance without compromising the energy density, which is mainly achieved through computationally expensive numerical simulations at…
Understanding the mechanical interplay between silicon anodes and their surrounding solid-electrolyte interphase (SEI) is essential to improve the next generation of lithium-ion batteries. We model and simulate a 2D elliptical silicon…
We prepared Na$_x$TO$_2$ (T = Mn, Co) nanostructures to use as cathode material in Na-ion batteries. The Rietveld refinement of x-ray diffraction data confirms the hexagonal symmetry. Scanning and transmission electron microscopy…
We report the electrochemical performance and diffusion kinetics of a newly designed NASICON type Na$_{3.3}$Mn$_{1.2}$Ti$_{0.75}$Mo$_{0.05}$(PO$_4$)$_3$/C composite material as a cathode for cost-effective sodium-ion batteries. A novel…
Enabling lithium (Li)-ion batteries with higher energy densities, longer cycle life, and lower costs will underpin the widespread electrification of the transportation and large-scale energy storage industries. Nickel (Ni)-rich layered…
Mechanical degradation in electrode materials during successive electrochemical cycling is critical for battery lifetime and aging properties. A common strategy to mitigate electrode mechanical degradation is to suppress the volume…
In recent years there has been a major interest in developing all solid state batteries, for the sake of safety (issues due to toxic and flammable organic liquid electrolytes are well known) as well as of high energy density…
We report the observation of a two-dimensional electron system (2DES) at the $(110)$ surface of the transparent bulk insulator SnO$_2$, and the tunability of its carrier density by means of temperature or Eu deposition. The 2DES is…