Related papers: A multi-technique approach to understanding delith…
Absorption losses and laser-induced damage threshold (LIDT) are considered as the major constraint for the development of optical coatings for high-power laser optics. Such coatings require paramount properties like low losses due to…
In this paper, the oxidation-assisted dealloying (OAD) of Cu0.7Al0.3 films with different microstructures which were obtained by high vacuum annealing at different temperatures were studied using powder X-ray diffraction, field-emission…
We have investigated the atomically-resolved substrate and homoepitaxial thin film surfaces of SrTiO3(001) using low-temperature scanning tunneling microscopy/spectroscopy (STM/STS) combined with pulsed laser deposition (PLD). It was found…
NiFe$_2$O$_4$ thin films with varying thickness were grown on SrTiO$_3$(001) by reactive molecular beam epitaxy. Soft and hard x-ray photoelectron spectroscopy measurements reveal a homogeneous cation distribution throughout the whole film…
We fabricated NiFe2O thin films on MgAl2O4 (001) substrates by reactive dc magnetron co-sputtering in a pure oxygen atmosphere at different substrate temperatures. The film properties were investigated by various techniques with a focus on…
Control of thin film stoichiometry is of primary relevance to achieve desired functionality. Pulsed laser deposition ablating from binary-oxide targets (sequential deposition) can be applied to precisely control the film composition,…
Electroactive polymer thin films undergo repeated reversible structural change during operation in electrochemical applications. While synchrotron X-ray scattering is powerful for the characterization of stand-alone and ex-situ organic thin…
We analyze the linear absorption spectrum of regioregular poly(3-hexylthiophene) films spun from a variety of solvents to probe directly the film microstructure and how it depends on processing conditions. We estimate the exciton bandwidth…
Oblique angle deposited oxide thin films have opened up new dimensions in fabricating optical interference devices with tailored refractive index profile along thickness by tuning its microstructure by varying angle of deposition.…
Next generation batteries based on lithium (Li) metal anodes have been plagued by the dendritic electrodeposition of Li metal on the anode during cycling, resulting in short circuit and capacity loss. Suppression of dendritic growth through…
Thin films of Co-TiO2 are deposited on silicon and quartz substrates using Pulse Laser Deposition (PLD) process at various oxygen partial pressures ranging from 6.6 x 10-3 Pascals (Pa) to 53 Pa. Crystal structure, transport and magnetic…
La$_2$NiO$_{4+\delta}$ has attracted increasing interest in recent years, both as oxygen electrode in solid oxide fuel cells and electrolysers due to its high electrochemical activity at intermediate to high temperatures, and as key…
The synthesis of the photochromic YHO films is based on the oxidation of deposited yttrium hydride in ambient conditions. The actual state of the films during the deposition process, which is influenced by the deposition pressure and the…
Functional properties of transition-metal oxides strongly depend on crystallographic defects. In transition-metal-oxide electrocatalysts such as SrIrO3 (SIO), crystallographic lattice deviations can affect ionic diffusion and adsorbate…
We investigated the effects of annealing on LaMnO$_3$ epitaxial thin films grown by pulsed laser deposition and propose an efficient method of characterizing their stoichiometry. Structural, magnetic, and optical properties coherently…
Gallium-based liquid metals have recently been found important in a variety of newly emerging applications such as room temperature metal 3D printing, direct writing of electronics and biomedicine etc. In all these practices, one frequently…
It was experimentally found that the evolution of dielectric loss with processing temperature displays a common trend in ferroelectric and dielectric thin oxide films: firstly an increase and then a decrease in dielectric loss when the…
In this study, we address the challenge of electrolyte degradation in all-solid-state humidified Li-$O_2$ batteries, which offer high theoretical energy density and potential cost advantages over conventional lithium-ion batteries.…
Chemically exfoliated nanoscale few-layer thin Li$_x$CoO$_2$ samples are studied as function of annealing at various temperatures, using transmission electron microscopy (TEM) and Electron Energy Loss Spectroscopies (EELS), probing the O-K,…
Ruthenium dioxide (RuO$_2$) thin films were synthesized by Chemical Solution Deposition (CSD) on silicon substrates using only water and acetic acid as solvents. The microstructure, phase-purity, electrical and optical properties as well as…