Related papers: Three-Dimensional In Situ Texture Development and …
Understanding the nucleation and growth of polycrystalline thin films is a long-standing goal. Polycrystalline films have many grains with different orientations that affect thin-film properties. Numerous studies have been done to determine…
Molecular dynamics simulations were used to quantify mechanically-induced structural evolution in nanocrystalline Al with an average grain size of 5 nm. A polycrystalline sample was cyclically strained at different temperatures, while a…
Here we analyze a three-dimensional distribution of crystallographic slip measured in-situ during the uniaxial deformation of hexagonal Ti-7Al. The slip field is reconstructed using a novel methodology that combines spatially resolved…
Elevated pressures are encountered in many metal forming processes that can alter microstructural evolution rates. Here we measure rate changes with pressure in recrystallization and grain growth in Fe through adaptation of…
Hexagonal metals have anisotropic coefficients of thermal expansion causing grain-level internal stresses during heating. High energy x-ray diffraction microscopy, a non-destructive, in situ, micromechanical and microstructural…
The residual stress plays a vital role in determination of the device performance that uses thin films coating and thus the accurate determination of stress and its optimization with process parameters is an ongoing research work for many…
We present an experimental study of the compaction dynamics for two-dimensional anisotropic granular systems. Compaction dynamics is measured at three different scales : (i) the macroscopic scale through the packing fraction $\rho$, (ii)…
The kinetics of dislocations is studied with computer simulation at loadings of different intensity. It is established that the dislocations have a few different structural states. The dislocations "with the micropore" play important role…
Three-dimensional X-ray diffraction (3DXRD) has been used to measure, in-situ, the evolution of $\sim 1800$ grains in a single phase low carbon ferritic steel sample during uniaxial deformation. The distribution of initial residual grain…
We present an original approach for predicting the static recrystallization texture development during annealing of deformed crystalline materials. The microstructure is considered as a population of subgrains and grains whose sizes and…
Strength, ductility, and failure properties of metals are tailored by plastic deformation routes. Predicting these properties requires modeling of the structural dynamics and stress evolution taking place on several length scales. Progress…
Past models of stress-strain response under cyclic loading mainly rely on macroscopic equations which consider microstructure evolution indirectly or simply discard microstructure information. Modern materials science, on the other hand,…
Deformation heterogeneities within microstructures of polycrystalline shape memory alloys (SMAs) during superelastic stressing are studied using both experiments and simulations. In situ X-ray diffraction, specifically the far-field high…
There is a long standing technological problem in which a stress dwell during cyclic loading at room temperature in Ti causes a significant fatigue life reduction. It is thought that localised time dependent plasticity in soft grains…
Samples of $\alpha$-SiC have been sintered with liquid phase (LPS) to 1950 $^\circ$C, in atmosphere of argon and processing times between 1 and 7 hours. Using scanning electron microscopy (SEM) the microstructure of the samples has been…
A polycrystalline solid is modelled as an ensemble of random irregular polyhedra filling the entire space occupied by the solid body, leaving no voids or flaws between them. Adjacent grains can slide with a relative velocity proportional to…
The mechanical properties of polycrystalline metals are governed by the interaction of defects that are generated by deformation within the 3D microstructure. In materials that deform by slip, the plasticity is usually highly heterogeneous…
We explore the effects of surface tension and mobility models in simulations of grain growth using threshold dynamics algorithms that allow performing large scale simulations, while naturally capturing the Herring angle condition at…
Grain growth is a key process in the thermomechanical treatment of metals. Recently, the presence of local residual stresses within fully recrystallized grains has attracted increasing interest in connection with shear-coupled grain…
To study the size and strain rate dependency of copper polycrystalline microstructures, a multi-layered copper/Al$_2$O$_3$ thin film was deposited on a Si substrate using a hybrid deposition system (combining physical vapour and atomic…