Related papers: Frequency fluctuations in nanomechanical silicon n…
Developing fault-tolerant quantum processors with error correction demands large arrays of physical qubits whose key performance metrics (coherence times, control fidelities) must remain within specifications over both short and long…
High-stability quartz oscillators are needed in a number of space applications. A short-term stability of parts in 10^{-14} [Allan deviation \sigma y(\tau) ] is sometimes required, for integration time \tau of approximately 1-10 s. The…
Mechanical dissipation poses an ubiquitous challenge to the performance of nanomechanical devices. Here we analyze the support-induced dissipation of high-stress nanomechanical resonators. We develop a model for this loss mechanism and test…
By coupling a quantum detector, a superconductor-insulator-superconductor junction, to a Josephson junction \textit{via} a resonant circuit we probe the high frequency properties, namely the ac complex admittance and the current…
Resonance properties of nanomechanical resonators based on doubly clamped silicon nanowires, fabricated from silicon-on-insulator and coated with a thin layer of aluminum, were experimentally investigated. Resonance frequencies of the…
Slow fluctuations of a qubit frequency are one of the major problems faced by quantum computers. To understand their origin it is necessary to go beyond the analysis of their spectra. We show that characteristic features of the fluctuations…
Recent years have seen a rapid reduction in the intrinsic loss of nanomechanical resonators (i.e., chip-scale mechanical oscillators). As a result, these devices become increasingly sensitive to the friction exerted by smallest amounts of…
The smaller the system, typically - the higher is the impact of fluctuations. In narrow superconducting wires sufficiently close to the critical temperature Tc thermal fluctuations are responsible for the experimentally observable finite…
Amorphous dielectric materials have been known to host two-level systems (TLSs) for more than four decades. Recent developments on superconducting resonators and qubits enable detailed studies on the physics of TLSs. In particular,…
Understanding and minimizing the sources of frequency noise in nanomechanical resonators is crucial for many sensing applications. In this work, we report an ultracoherent perimeter-mode nanomechanical resonator co-integrated with an…
State of the art nanomechanical resonators present quality factors Q ~ 10^3 - 10^5, which are much lower than those that can be naively extrapolated from the behavior of micromechanical resonators. We analyze the dissipation mechanism that…
High-\Qm{} mechanical resonators are crucial for applications where low noise and long coherence time are required, as mirror suspensions, quantum cavity optomechanical devices, or nanomechanical sensors. Tensile strain in the material…
The frequency flicker of an oscillator, which appears as a 1/f^3 line in the phase noise spectral density, and as a floor on the Allan variance plot, originates from two basic phenomena, namely: (1) the 1/f phase noise turned into 1/f…
Observation of quantum phenomena in cryogenic, optically cooled mechanical resonators has been recently achieved by a few experiments based on cavity optomechanics. A well-established experimental platform is based on a thin film…
We study quantum fluctuations of persistent current in a small superconducting ring. Based on a microscopic model of the ring we argue that under certain conditions such ring will exhibit coherent quantum phase slips, similar to those in a…
We measure frequency- and dissipation-quadrature noise in superconducting lithographed microwave resonators with sensitivity near the vacuum noise level using a Josephson parametric amplifier. At an excitation power of 100~nW, these…
Sensing via a mechanical frequency shift is a powerful measurement tool, and, therefore, understanding and mitigating frequency noise affecting mechanical resonators is imperative. Thermomechanical noise fundamentally limits mechanical…
The damping rates of high quality factor nanomechanical resonators are well beyond intrinsic limits. Here, we explore the underlying microscopic loss mechanisms by investigating the temperature-dependent damping of the fundamental and third…
Superconducting microwave resonators are critical to quantum computing and sensing technologies. Additionally, they are common proxies for superconducting qubits when determining the effects of performance-limiting loss mechanisms such as…
Progressive reduction of the effective diameter of a nanowire is applied to trace evolution of the shape of superconducting transition $R(T)$ in quasi-one-dimensional aluminum structures. In nanowires with effective diameter $\leq$ 15 nm…