Related papers: Wind- and Gravity-Forced Drop Depinning
Advancing and receding angles are physical quantities frequently measured to characterize the wetting properties of a rough surface. Thermodynamically, the advancing and receding angles are often interpreted as the maximum and minimum…
Wet-on-wet printing is frequently used in inkjet printing for graphical and industrial applications, where substrates can be coated with a thin liquid film prior to ink drop deposition. Two drops placed close together are expected to…
The vaporization of a freely moving drop in a uniform, high-temperature gas stream is investigated through direct numerical simulation. The incompressible Navier-Stokes equations with surface tension and phase change are solved in…
The shape of a drop pinned in a local equilibrium on an incline is a long-standing problem. The substrate can be homogeneous or heterogeneous and we herewith consider a drop pinned on an incline at the junction between a hydrophilic…
Liquid drops slide more slowly over soft, deformable substrates than over rigid solids. This phenomenon can be attributed to the viscoelastic dissipation induced by the moving wetting ridge, which inhibits a rapid motion, and is called…
For a drop on an incline with small tilt angle or small Bond number, when the contact line is a circle, we show that the retentive force factor is exactly pi/2 at first order in the tilt angle or the Bond number. The retentive force factor…
We discuss the analogy of the behaviour of films and drops of liquid on a rotating horizontal cylinder on the one hand and substrates with regular one-dimensional wettability patterns on the other hand. Based on the similarity between the…
We present systematic wetting experiments and numerical simulations of gravity driven liquid drops sliding on a plane substrate decorated with a linear chemical step. Surprisingly, the optimal direction to observe crossing is not the one…
The impact of a liquid drop with high Reynolds and Weber numbers on a wet solid surface typically results in the emergence, rising, and expansion of a corona-like thin jet. This phenomenon is explained by the propagation of a kinematic…
When a liquid drops impinges a hydrophobic rough surface it can either bounce off the surface (fakir droplets) or be impaled and strongly stuck on it (Wenzel droplets). The analysis of drop impact and quasi static ''loading'' experiments on…
Droplet impact on rough surfaces is of critical importance to various applications, yet remains incompletely understood. The present work aims to uncover droplet impact dynamics on random hydrophobic surfaces using volume of fluid…
The rich structures arising from the impingement dynamics of water drops onto solid substrates at high velocities are investigated numerically. Current methodologies in the aircraft industry estimating water collection on aircraft surfaces…
We report an experimental study of liquid drops moving against gravity, when placed on a vertically vibrating inclined plate, which is partially wetted by the drop. The frequency of vibrations ranges from 30 to 200 Hz, and, above a…
A falling liquid drop, after impact on a rigid substrate, deforms and spreads, owing to the normal reaction force. Subsequently, if the substrate is non-wetting, the drop retracts and then jumps off. As we show here, not only is the impact…
Depinning of two-dimensional liquid ridges and three-dimensional drops on an inclined substrate is studied within the lubrication approximation. The structures are pinned to wetting heterogeneities arising from variations of the strength of…
Liquid drops on soft solids generate strong deformations below the contact line, resulting from a balance of capillary and elastic forces. The movement of these drops may cause strong, potentially singular dissipation in the soft solid.…
A liquid drop sitting on an elastic rod may act as a winch, or windlass, and pull the rod inside itself and coil it. This windlass effect has been shown to be generated by surface tension forces and to work best for small systems. Here we…
Breakup of liquid drops occurs in several natural and industrial settings. Fully resolved Volume of Fluid based simulations presented in this study reveal the complete flow physics and droplet dynamics that lead to the breakup of a drop in…
The ambient gas pressure is determined for the onset of splashing of low-viscosity liquid drops on smooth dry surfaces as we change the control parameters: drop impact velocity, drop radius, viscosity, surface tension, density, and gas…
A fluid droplet in general deforms, if subject to active driving, such as a finite slip velocity or active tractions on its interface. We show that these deformations and their dynamics can be computed analytically in a perturbation theory…