Related papers: Multifunctional properties of composition graded A…
Accumulative Roll Bonding(ARB) process was used to develop few-layer graphene nano platelets reinforced aluminum matrix (GNPs/Al) composite in the form of sheets. Annealed Al sheets were ARB processed up to 6 pass along with coating of…
Precipitation hardening, which relies on a high density of intermetallic precipitates, is a commonly utilized technique for strengthening structural alloys. Structural alloys are commonly strengthened through a high density of small size…
Aluminum and their alloys, after careful treatments, can develop excellent mechanical, tribological, electrical and chemical (high corrosion resistance) properties. However, 7000 series, with Cu in the alloy, have a poor corrosion…
Nanowires are formed by indenting and subsequently retracting two pieces of sodium metal. Their cross-section gradually reduces upon retraction and the diameters can be obtained from the conductance. In previous work we have demonstrated…
Compositionally graded interfaces in power electronic devices eliminate dislocations, but they can also decrease thermal conduction, leading to overheating. We quantify the thermal resistances of GaN/AlN graded interfaces of varying…
Recently synthesized Porous 12-Atom-Wide Armchair Graphene Nanoribbons Nano Lett. 2024, 24, 10718-10723 exhibit tunable properties through periodic porosity, enabling precise control over their electronic, optical, thermal, and mechanical…
Epitaxial Al/GaAs/Al structures having controlled thickness of high-quality GaAs and pristine interfaces have been fabricated using a wafer-bonding technique. III-V semiconductor/Al structures are grown by molecular beam epitaxy on III-V…
We investigate the transport properties of a thin superconducting Al layer covering a square array of magnetic dots with out-of-plane magnetization. A thorough characterization of the magnetic properties of the dots allowed us to fine-tune…
We report experiments on aluminum nanowires in ultra-high vacuum at room temperature that reveal a periodic spectrum of exceptionally stable structures. Two "magic" series of stable structures are observed: At low conductance, the formation…
Grain size engineering, particularly reducing grain size into the nanocrystalline regime, offers a promising pathway to further improve the strength-to-weight ratio of Al alloys. Unfortunately, the fabrication of nanocrystalline metals…
The precipitation microstructure of the \gamma' (AlAg2) intermetallic phase has been examined in aluminium-silver-copper alloys. The microstructure developed in an Al-0.90at.%Ag-0.90at.%Cu alloy was significantly different from that…
Charge transport measurements on flexible Mo$_{6}$S$_{3}$I$_{6}$ (MoSI) nanowires with different diameters in highly imperfect 2-terminal circuits reveal systematic power law behaviour of the conductivity $\sigma(T,V)$ as a function of…
By means of density functional theory the electronic structure of the MgB2 superconductor was characterised and compared with that of the related iso-structural systems: AlB2, ZrB2, NbB2, and TaB2. Using the full-potential linearized…
The combination of strong spin-orbit coupling, large $g$-factors, and the coupling to a superconductor can be used to create a topologically protected state in a semiconductor nanowire. Here we report on growth and characterization of…
The layered ternary sp conductor NaAlSi, possessing the iron-pnictide "111" crystal structure, superconducts at 7 K. Using density functional methods, we show that this compound is an intrinsic (self-doped) low-carrier-density semimetal…
Electronic transport and magnetic properties of bulk and rapid melt quenched samples of the Mn$_3$Al Heusler alloy were studied. A correlation between the magnetic and structural states was established. For a cast sample, there is no…
The electrical transport properties of corner-shaped Al superconducting microstrips have been investigated. We demonstrate that the sharp turns lead to asymmetric vortex dynamics, allowing for easier penetration from the inner concave angle…
The generation of high magnetic fields requires materials with high electric conductivity and good strength properties. Cu/Nb composites are considered to be good candidates for this purpose. In this work we aim to predict, from theory, the…
Coupled-wire constructions have proven to be useful tools to characterize Abelian and non-Abelian topological states of matter in two spatial dimensions. In many cases, their success has been complemented by the vast arsenal of other…
We study the optical and electrical properties of silver films with a graded thickness obtained through metallic evaporation in vacuum on a tilted substrate to evaluate their use as semitransparent electrical contacts. We measure their…