Related papers: Transformable Reflective Telescope for optical tes…
Reflectance Transformation Imaging (RTI) is a popular technique that allows the recovery of per-pixel reflectance information by capturing an object under different light conditions. This can be later used to reveal surface details and…
The need for both high quality images and lightweight structures is one of the main drivers in space telescope design. An efficient wavefront control system will become mandatory in future large observatories, retaining performance while…
We present an overview of the design of IRIS, an infrared (0.85 - 2.5 micron) integral field spectrograph and imaging camera for the Thirty Meter Telescope (TMT). With extremely low wavefront error (<30 nm) and on-board wavefront sensors,…
We present an overview of the design of IRIS, an infrared (0.84 - 2.4 micron) integral field spectrograph and imaging camera for the Thirty Meter Telescope (TMT). With extremely low wavefront error (<30 nm) and on-board wavefront sensors,…
This paper describes a setup aimed at measuring the so-called Tilt-To-Length (TTL) coupling in the optical benches of the LISA mission. The TTL is the coupling of the angular jitter of any optical setup into the optical path length between…
The Fractional Fourier Transform (FRT) corresponds to an arbitrary-angle rotation in the phase space, e.g. the time-frequency (TF) space, and generalizes the fundamentally important Fourier Transform. FRT applications range from classical…
We entertain the use of light dependent resistors as a viable option as measuring sensors in optics laboratory experiments or classroom demonstrations. The main advantages of theses devices are essentially very low cost, easy handling and…
The Wide-Field Spectroscopic Telescope (WST) is a concept for a 12-m class seeing-limited telescope providing two concentric fields of view for simultaneous Multi-Object Spectroscopy and Integral Field Spectroscopy. The specified wavelength…
In optical astronomical telescopes, the primary baffle is a tube-like structure centering in the hole of the primary mirror and the vanes usually locate inside the baffle, improving the suppression of stray light. They are the most common…
The transmission electron microscope (TEM) has become an essential tool for innovation in nanoscience, material science, and biology. Despite these instruments being widely used across both industry and academia, academics may hesitate to…
The RCT 1.3-meter telescope, formerly known as the Kitt Peak National Observatory (KPNO) 50-inch telescope, has been refurbished as a fully robotic telescope, using an autonomous scheduler to take full advantage of the observing site…
In this paper are discussed the nulling and imaging properties of monolithic pupil telescopes equipped with a focal plane waveguide array, which could be envisaged as precursor space missions for future nulling interferometers or…
Recently, Su et al. (2016) propose a telescope design, referred as the "SYZ" design, for Chinese new project of a 12m optical-infrared telescope. The SYZ telescope design consists of three aspheric mirrors with non-zero power, including a…
The European Solar Telescope (EST) is a project aimed at studying the magnetic connectivity of the solar atmosphere, from the deep photosphere to the upper chromosphere. Its design combines the knowledge and expertise gathered by the…
(Abridged) In this paper, we present a project of multi-channel wide-field optical sky monitoring system with high temporal resolution -- Small Aperture Imaging Network Telescope (SAINT) -- mostly built from off-the-shelf components and…
In this work, we measure and model tilted x-ray refractive lenses to investigate their effects on an x-ray beam. The modelling is benchmarked against at-wavelength metrology obtained with x-ray speckle vector tracking experiments (XSVT) at…
Imaging atmospheric Cherenkov telescopes (IACTs) used for ground-based gamma-ray astronomy at TeV energies use reflectors with areas on the order of 100m$^2$ as their primary optic. These tessellated reflectors comprise hundreds of mirror…
Tilt-to-length (TTL) coupling, caused by the jitter of test masses or satellites, is a significant noise source in space-based gravitational wave detection. Calibrating and suppressing TTL coupling noise at the sub-nanometer level is…
A new generation of telescopes with mirror diameters of 20 m or more, called extremely large telescopes (ELTs) has the potential to provide unprecedented imaging and spectroscopy of exo-planetary systems, if the difficulties in achieving…
We describe a method that uses Optical Transition Radiation (OTR) screens to measure in a single shot the emittance of an electron beam with an energy greater than 100 MeV. Our setup consists of 4 OTR screens located near a beam waist. A…