Related papers: Structural properties of Fe-Ni/Cu/Fe-Ni trilayers …
The chemical mixing at the Fe-on-Ti and Ti-on-Fe, i.e. the bottom and top interfaces of Fe in atomically deposited layers, were studied experimentally and by molecular dynamics simulations of the layer growth. The basic structure and…
The structural and magnetic properties of Fe$_{1-x}$Ni$_x$~($x$ = 0.32, 0.36, 0.40, 0.50) alloys have been investigated using synchrotron based x-ray diffraction (XRD) technique with x-rays of wavelength 0.63658 \AA\ down to 50 K…
The magnetic properties of trilayers consisting of a diluted magnetic alloy, CuMn (Cu0.99Mn0.01), a soft ferromagnet, Py(Ni0.8Fe0.2), and an antiferromagnet, alpha-Fe2O3, were investigated. The samples, grown by UHV magnetron sputtering,…
The Fe$_{0.64}$Ni$_{0.36}$ alloy exhibits an anomalously low thermal expansion at ambient conditions, an effect that is known as the invar effect. Other Fe$_{x}$Ni$_{1-x}$ alloys do not exhibit this effect at ambient conditions but upon…
Annealing of crystalline multilayers composed of two miscible elements usually causes interfacial mixing of the constituent atoms, possibly leading to the formation of binary alloys at the interfaces. Magnetron sputtered c-Ni/a-Zr…
We investigate the ground state properties of Invar alloys via detailed study of the electronic structure of Fe$_{1-x}$Ni$_x$ alloys ($x$ = 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.9) employing $x$-ray photoelectron spectroscopy (XPS). While all the…
Growth, electronic and magnetic properties of $\gamma'$-Fe$_{4}$N atomic layers on Cu(001) are studied by scanning tunneling microscopy/spectroscopy and x-ray absorption spectroscopy/magnetic circular dichroism. A continuous film of ordered…
Interlayer exchange couplings were examined for Co2FeAl0.5Si0.5(CFAS)/Cr/CFAS trilayered films grown on MgO (001) single crystal and thermally oxidized Si substrates. The films were (001) epitaxial on MgO and (110) textured polycrystalline…
Ion-beam sputtering has been used to prepare Fe/Si multilayers on a variety of substrates and over a wide range of temperatures. Small-angle x-ray diffraction and transmission electron microscopy experiments show that the layers are heavily…
This paper reports high resolution X-ray photoelectron spectroscopy (XPS) studies on Fe$_{1-x}$Ni$_x$ (x=0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.9) alloys down to 10 K temperature. Core levels and Auger transitions of the alloys except the invar…
We report properties of topological insulator - ferromagnet - superconductor trilayers comprised of thin films of 20 nm thick $\rm Bi_2Se_3$ on 10 nm $\rm SrRuO_3$ on 30 nm $\rm YBa_2Cu_3O_x$. As deposited trilayers are underdoped and have…
FePd thin films have been recently considered as promising material for high-density magnetic storage devices. However, it is necessary to find a proper method of fabrication for the (001)-textured and chemically well-ordered alloy. In this…
Self assembly on suitably chosen substrates is a well exploited root to control the structure and morphology, hence magnetization, of metal films. In particular, the Cu3Au(001) surface has been recently singled out as a good template to…
Unconventional superconductivity has been suggested to be present at the interface between bismuth and nickel in thin-film bilayers. In this work, we study the structural, magnetic and superconducting properties of sputter deposited Bi/Ni…
The electrical resistivity and the anisotropic magnetoresistance (AMR) was investigated for Ni Co alloys at and below room temperature. The Ni Co alloy layers having a thickness of about 2 um were prepared by electrodeposition on Si wafers…
Ni/Al reactive multilayers are promising materials for applications requiring controlled local energy release and superior mechanical performance. This study systematically investigates the impact of compositional variations, ranging from…
Fe3Si/Al/Fe3Si/GaAs(001) structures were deposited by molecular-beam epitaxy and characterized by transmission and scanning electron microscopy, and x-ray diffraction. The first Fe3Si film on GaAs(001) is growing epitaxially as (001)…
Reflected neutron beam originating from a crystal monochromator contains higher order wavelength contribution. Creating multilayer mirror structures with custom reflectivity curves including a monochromatic polarized neutron beam is a…
We report on a study of (001) oriented fcc Fe-Ni alloy surfaces which combines first-principles calculations and low-temperature STM experiments. Density functional theory calculations show that Fe-Ni alloy surfaces are buckled with the Fe…
In this study we report on the film growth and characterization of thin (approximately 50 nm thick) Ti-Fe-C films deposited on amorphous quartz. The experimental studies have been complemented by first principles density functional theory…