Related papers: Detector control system for the CBM-TOF

The proposed Circular Electron Positron Collider (CEPC) imposes new challenges for the vertex detector in terms of pixel size and material budget. A Monolithic Active Pixel Sensor (MAPS) prototype called TaichuPix, based on a column drain…

We present a microchannel plate (MCP) detector for compact time-of-flight mass spectrometers (TOF-MS) that jointly optimizes the anode geometry and high-voltage AC-decoupling network for electrically floating operation. Undershoot-driven…

The depleted CMOS sensors are emerging as one of the main candidate technologies for future tracking detectors in high luminosity colliders. Its capability of integrating the sensing diode into the CMOS wafer hosting the front-end…

Photon counting detector systems on sounding rocket payloads often require interfacing asynchronous outputs with a synchronously clocked telemetry (TM) stream. Though this can be handled with an on-board computer, there are several low cost…

To achieve high precision and accuracy for mass measurements of exotic nuclei by Time-of-flight (TOF) methods: high-resolution beam-line magnetic-rigidity time-of-flight (B$\rho$-TOF) and in-ring isochronous mass spectrometry (IMS), a…

Grid-forming (GFM) converters face significant challenges in limiting current during transient grid events while preserving their grid-forming behavior. This paper offers an elegant solution to the problem with a priori guarantees,…

We present a development of the ALFRED framework that includes support for the IPbus protocol, created for the Fast Interaction Trigger (FIT) detector in the ALICE experiment at CERN. This modification resolves the incompatibility between…

We present Doberman (Detector OBsERving and Monitoring ApplicatioN), a lightweight, modular, and open-source slow control system designed for small-to medium-scale physics experiments. Doberman addresses the gap between heavyweight…

A novel detector based on a polycrystalline diamond sensor is here employed in an advanced Time-Of-Flight scheme for the characterization of energetic ions accelerated during laser-matter interactions. The optimization of the detector and…

The Simons Observatory (SO) will perform ground-based observations of the cosmic microwave background (CMB) with several small and large aperture telescopes, each outfitted with thousands to tens of thousands of superconducting aluminum…

Monolithic active pixel sensors (MAPS) are now well established as a technology for tracking charged particles, especially when low material budget is desirable. For such applications, sensors focus on spatial resolution and pixels with…

The fast timing MPGD is a micro-pattern gaseous detector conceived for achieving sub-nanosecond time resolution while maintaining the ability to instrument large areas in high-rate environments; applications of such technology are…

The silicon pixel sensor is the core component of the vertex detector for the Circular Electron Positron Collider~(CEPC). The JadePix3 is a full-function large-size CMOS chip designed for the CEPC vertex detector. To test all the functions…

Gate controllable electronic trap detection method has been demonstrated by regulating the gate potential of MIS devices. This method is based on shift of capacitance voltage (CV) curve as well as flatband voltage (VFB) measure in less than…

We report on the design and performance of the electromagnetic calorimeter timing readout system (EMTiming) for the Collider Detector at Fermilab (CDF). The system will be used in searches for rare events with high energy photons to verify…

Charged-hadron identification (PID) is a critical requirement for the physics program of the Circular Electron-Positron Collider (CEPC). The baseline detector relies on ionization measurements from a time projection chamber (TPC), which…

The Time-of-Flight (ToF) technique coupled with semiconductor-like detectors, as silicon carbide and diamond, is one of the most promising diagnostic methods for high-energy, high repetition rate, laser-accelerated ions allowing a full…

The large scientific projects present new technological challenges, such as the distributed control over a communication network. In particular, the middleware EPICS is the most extended communication standard in particle accelerators. The…

Transition Edge Sensor (TES) bolometers are a well-established technology with a strong track record in experimental cosmology, making them ideal for current and future radio astronomy instruments. The Tomographic Ionized-carbon Mapping…

In this paper we present the R&D activity on a new GEM-based TPC prototype for AMADEUS, a new experimental proposal at the DA{\Phi}NE {\Phi}-factory at the Laboratori Nazionali di Frascati (INFN), aiming to perform measurements of the…