Related papers: Focal-ratio-degradation (FRD) mitigation in a mult…
Envisioning more compact and cost accessible astronomical instruments is now possible with existing photonic technologies like specialty optical fibres, photonic lanterns and ultrafast laser inscribed chips. We present an original design of…
In ground-based astronomy, starlight distorted by the atmosphere couples poorly into single-mode waveguides but a correction by adaptive optics, even if only partial, can boost coupling into the few-mode regime allowing the use of photonic…
For the past forty years, optical fibres have found widespread use in ground-based and space-based instruments. In most applications, these fibres are used in conjunction with conventional optics to transport light. But photonics offers a…
Focal ratio degradation (FRD), the increase of light's focal ratio between the input into an optical fiber and the output, is important to characterize for astronomical spectrographs due to its effects on throughput and the point spread…
Focal ratio degradation (FRD) is a major contributor to throughput and light loss in a fibre spectroscopic telescope system. We combine the guided mode theory in geometric optics and a well-known model, power distribution model (PDM), to…
We present measurements of how multimode fiber focal-ratio degradation (FRD) and throughput vary with levels of fiber surface polish from 60 to 0.5 micron grit. Measurements used full-beam and laser injection methods at wavelengths between…
The thin and flexible nature of optical fibres often makes them the ideal technology to view biological processes in-vivo, but current microendoscopic approaches are limited in spatial resolution. Here, we demonstrate a new route to high…
Focal Ration Degradation (FRD) is a change in light angular distribution caused by fiber optics. FRD is important to fiber-fed, spectroscopic astronomical systems because it can cause loss of signal, degradation in spectral resolution, or…
The performance of fiber-fed astronomical spectrographs is highly influenced by the properties of fibers. The near-field and far-field scrambling characteristics have a profound impact on the line spread function (LSF) of the spectra. Focal…
Confocal microscopy is the cornerstone of cellular biology and biomedical research due to its non-destructive imaging, compatibility with live cells, sensitivity, optical sectioning, and subcellular resolution. To meet the demand for rapid…
We report on the development of a compact (volume $\approx$ 100\:cm$^3$), multimode diffraction-limited Raman spectrograph and probe designed to be compact as possible. The spectrograph uses `off the shelf' optics, a custom 3D-printed…
We demonstrate the use of an optimized 5 core photonic lantern (PL) to simultaneously measure tip/tilt errors at the telescope focal plane, while also providing the input to an instrument. By replacing a single mode (SM) fiber with the PL…
Photonic Lanterns (PLs) are tapered waveguides that gradually transition from a multi-mode fiber geometry to a bundle of single-mode fibers (SMFs). They can efficiently couple multi-mode telescope light into a multi-mode fiber entrance at…
We are now moving into an era where multi-object wide-field surveys, which traditionally use single fibres to observe many targets simultaneously, can exploit compact integral field units in place of single fibres. Current multi-object…
We propose and theoretically analyse a novel hollow-core photonic crystal fibre (PCF) that is engineered so as to strongly suppress higher order modes, i.e., to provide robust LP$_{01}$ single-mode guidance in all the wavelength ranges…
The photonic lantern (PL) is a tapered waveguide that can efficiently couple light into multiple single-mode optical fibers. Such devices are currently being considered for a number of tasks, including the coupling of telescopes and…
One of the fundamental limitations to high bit rate, long distance, telecommunication in optical fibers is Polarization Mode Dispersion (PMD). Here we introduce a conceptually new method to reduce PMD in optical fibers by carrying out…
Multi-mode fiber (MMF) endoscopes are a new type of endoscope that use only a single optical fiber to transmit images, achieving much higher spatial resolution for a given diameter than commercial fiber bundle endoscopes. However, a…
We experimentally and numerically investigate Raman-driven power depletion in the fundamental mode of few-mode fibers (FMFs) excited by visible ultrashort pulses. Using a tunable femtosecond laser and SMF-28 fibers operated below the…
Multi-mode fibers (MMFs) and single-mode fibers (SMFs) are widely used in optical communication networks. MMFs are the practical choice in terms of cost in applications that require short distances. Beyond that, SMFs are necessary because…