Related papers: Focal-ratio-degradation (FRD) mitigation in a mult…
Recently, we demonstrated how an astrophotonic light reformatting device, based on a multicore fibre photonic lantern and a three-dimensional waveguide component, can be used to efficiently reformat the point spread function of a telescope…
The performance of highly-multiplexed spectrographs is limited by focal degradation (FRD) in the optical fibres. It has already been shown that this is caused mainly by processes concentrated around the mounting points at the ends of the…
We present the design, fabrication, and characterization of mode-selective photonic lanterns using double-clad fibers. Here, we exploited several custom-pulled double-clad fibers to achieve the symmetry break required to excite higher-order…
We present numerical characterizations of the wavefront sensing performance for few-mode photonic lantern wavefront sensors (PLWFSs). These characterizations include calculations of throughput, control space, sensor linearity, and an…
Modern extreme adaptive optics (AO) systems achieving diffraction-limited performance open up new possibilities for instrumentation. Especially important for the fields of spectroscopy and interferometry is that it enables the prospect to…
Multimode fibers (MMFs) offer a cost-effective connection solution for small and medium length networks. However, data rates through multimode fibers are traditionally limited by modal dispersion. Signal processing and Multiple-Input…
Multimode optical fibers (MMFs) have gained renewed interest in the past decade, emerging as a way to boost optical communication data-rates in the context of an expected saturation of current single-mode fiber-based networks. They are also…
Exploring the use of single-mode fibers (SMFs) in high precision Doppler spectrometers has become increasingly attractive since the advent of diffraction-limited adaptive optics systems on large-aperture telescopes. Spectrometers fed with…
A multimode optical receiver for free space optical communications (FSOC) based on a photonic lantern and adaptive optics coherent beam combining (CBC) of the lantern's single-mode outputs is proposed and demonstrated for the first time.…
The remarkable recent demonstrations in ultralow loss Inhibited-Coupling (IC) hollow-core photonic crystal fibers (HCPCFs) place them as serious candidates for the next-generation of long-haul fiber optics systems. A hindrance to this…
Space-division multiplexing (SDM) is one of the key enabling technologies to increase the capacity of fiber communication systems. However, implementing SDM-based systems using multimode fiber has been challenging with the need for compact,…
We demonstrate that photonic lanterns based on tapered multicore fibres provide an efficient way to couple multimode states of light to a two-dimensional array of Single-Photon Avalanche Detectors (SPADs), each of which has its own…
This paper reports on the modal noise characterisation of a hybrid reformatter. The device consists of a multicore-fibre photonic lantern and an ultrafast laser-inscribed slit reformatter. It operates around 1550 nm and supports 92 modes.…
We evaluate large-core FSO links where excellent coupling pairs with bandwidth fading due to multi-mode propagation. The 10-Gb/s/{\lambda} limit for 105-{\mu}m double-clad fibers is mitigated by spectral launch tuning, restoring 84% of…
We study the use of separate cores of a multicore erbium-doped fiber amplifier (MC-EDFA) in a noise-canceled link for ultrastable optical frequency transfer. We demonstrate fractional frequency instability of $5\times10^{-19}$ at 1000 s…
There are numerous advantages to exploiting diffraction-limited instrumentation at astronomical observatories, which include smaller footprints, less mechanical and thermal instabilities and high levels of performance. To realize such…
We propose and demonstrate that a conventional multimode fiber can function as a high resolution, low loss spectrometer. The proposed spectrometer consists only of the fiber and a camera that images the speckle pattern generated by…
We designed and built a new type of spatial mode multiplexer, based on Multi-Plane Light Conversion (MPLC), with very low intrinsic loss and high mode selectivity. In this first demonstration we show that a typical 3-mode multiplexer…
When light is scattered or reflected accidentally in the lens, flare artifacts may appear in the captured photos, affecting the photos' visual quality. The main challenge in flare removal is to eliminate various flare artifacts while…
The first demonstration of narrowband spectral filtering of multimode light on a 3D integrated photonic chip using photonic lanterns and waveguide Bragg gratings is reported. The photonic lanterns with multi-notch waveguide Bragg gratings…