Related papers: The laser diode calibration system of the ICARUS T…
Laser Interferometer Space Antenna LISA represents the next frontier in gravitationalwave GW astronomy targeting the detection of millihertz gravitational signals Central to LISAs operation is the nanosecondprecision estimation of the light…
The National Ignition Facility (NIF) requires that pulses from each of the 192 laser beams be positioned on target with an accuracy of 50 um rms. Beam quality must be sufficient to focus a total of 1.8 MJ of 0.351-um light into a…
The Accelerator Mass Spectrometry technique makes it possible to measure rare long-lived isotopes such as $^{10}$Be, $^{14}$C, $^{26}$Al, $^{36}$Cl, $^{41}$Ca and $^{129}$I. The content of these isotopes can be at the level of 10$^{-15}$ of…
Scintillation light produced in liquid argon (LAr) must be shifted from 128 nm to visible wavelengths in light detection systems used for liquid argon time-projection chambers (LArTPCs). To date, LArTPC light collection systems have…
The Two-Photon Absorption (TPA) process provides an excellent method for the characterisation of solid-state sensors due to its intrinsic 3D resolution for the excitation of electron-hole pairs. This paper presents the commissioning of a…
The Far-Infrared Surveyor (FIS) onboard the AKARI satellite has a spectroscopic capability provided by a Fourier transform spectrometer (FIS-FTS). FIS-FTS is the first space-borne imaging FTS dedicated to far-infrared astronomical…
All of the present methods for calibration and monitoring of TOF-PET scanner detectors utilize radioactive isotopes such as e.g. $^{22}$Na or $^{68}$Ge, which are placed or rotate inside the scanner. In this article we describe a novel…
We construct a terahertz time-domain spectrometer (THz-TDS) system based on photoconductive antenna (PCA). A 800 nm Ti sapphire femtosecond laser with 80 MHz repetition rate provides the pump and probe laser pulse, which has a 45 fs pulse…
We report on a novel electro-optic device for the diagnostics of high repetition rate laser systems. It is composed of a microwave receiver and of a second order nonlinear crystal, whose irradiation with a train of short laser pulses…
We performed photometric calibration of the PhotoMultiplier Tube (PMT) and readout electronics used for the new fluorescence detectors of the Telescope Array (TA) experiment using Rayleigh scattered photons from a pulsed nitrogen laser…
We demonstrate the imaging capability of a frequency modulated continuous wave lidar based on a fiber bundle. The lidar constructs velocity and range images for hard targets at a rate of 60 Hz. The sensing range is up to 30 m with 20 mW of…
Large-scale systems, such as very large accelerators used for fundamental research, require the implementation of precise timing and synchronization systems over distances of several tens of kilometers. A very high precision has been…
The light from a source at a distance d will arrive at detectors separated by 100 AU at times that differ by as much as 120 (d/100 Mpc)^{-1} nanoseconds because of the curvature of the wavefront. At gigahertz frequencies, the arrival time…
A Central Laser Facility is a system composed of a laser placed at a certain distance from a light-detector array, emitting fast light pulses, typically in the vertical direction, with the aim to calibrate that array. During calibration…
In the last few years, many advances have been made in the demonstration of high-average power pulsed THz sources; however, little effort has been made to study compatible sensitive field-resolved detectors. Here, we investigate…
We present a compact iodine-stabilized laser system at 633 nm, based on a distributed-feedback laser diode. Within a footprint of $27\times 15$ cm$^2$ the system provides 5 mW of frequency stabilized light from a single-mode fiber. Its…
Depth cameras, typically in RGB-D configurations, are common devices in mobile robotic platforms given their appealing features: high frequency and resolution, low price and power requirements, among others. These sensors may come with…
LiDAR (laser based radar) systems are a major part of many new real-world interactive systems, one of the most notable being autonomous cars. The current market LiDAR systems are limited by detector sensitivity: when output power is at…
The Palomar Testbed Interferometer (PTI) archive of observations between 1998 and 2005 is examined for objects appropriate for calibration of optical long-baseline interferometer observations - stars that are predictably point-like and…
The final phase of the ICARUS physics program requires a sensitive mass of liquid Argon of 5000 tons or more. The T600 detector stands today as the first living proof that such large detector can be built and that liquid Argon imaging…