Related papers: A simple approach to bulk bioinspired tough cerami…
Ultra-high-temperature ceramics (UHTCs) are candidate structural materials for applications that require resiliency to extreme temperature (>2000{\deg}C), high mechanical loads, or aggressive oxidizing environments. Processing UHTC…
Most monolithic brittle materials are vulnerable to the failure by cracks because of a lack of intrinsic toughening mechanisms, such as the plasticity in the vicinity of the crack front. As a result, most of the efforts to mitigate the…
Dielectric materials, with high tunability at microwave frequencies, are key components in the design of microwave communication systems. Dense Ba0.6Sr0.4TiO3 (BST) ceramics, with different grain sizes, were prepared in order to optimise…
The inclusion of small amounts of copper is often reported to enhance the mechanical and biointegrative performance of bioceramics towards tissue engineering applications. In this work, 3D scaffolds were additively manufactured by…
Revealing the hardening and strengthening mechanisms is crucial for facilitating the design of superhard and high-strength high-entropy ceramics (HECs). Here, we take high-entropy diborides (HEB$_2$) as the prototype to thoroughly…
Understanding the atomic-scale structure and dynamics of amorphous oxide surfaces is essential for interpreting their chemical reactivity, mechanical stability, and interfacial behavior, yet direct experimental characterization remains…
In strained mechanical resonators, the concurrence of tensile stress and geometric nonlinearity dramatically reduces dissipation. This phenomenon, dissipation dilution, is employed in mirror suspensions of gravitational wave interferometers…
A Cu-Cr composite was processed by severe plastic deformation to investigate the role of interphase boundaries on the grain size reduction mechanisms. The as-deformed material exhibits a grain size of only 20nm. This gives rise to a…
In order to improve the performance of existing technologies based on single crystal diamond grown by chemical vapour deposition (CVD), and to open up new technologies in fields such as quantum computing or solid state and semiconductor…
Progress in the manufacturing of ceramics, but also of sintered metals, strongly relies on the evaluation of the density distribution in green bodies. This evaluation is crucial from many points of view, including the calibration of…
Changes in crystalline phases resulting from low-temperature ageing of different yttria doped and non-doped zirconia-toughened alumina composites and nanocomposites were investigated under controlled humidity and temperature conditions in…
Ultra-thin crystal targets in shape of self-supporting membranes were produced for our experiments with parametric x-rays emitted by low-energy electrons. Concise description of the technology developed for production of silicon crystal…
Polymer composites were manufactured using biocarbon particles as a reinforcing filler to improve the mechanical and thermal properties. However, a detailed examination of dispersion and agglomeration of filler is essential to correlate the…
Thin-shell structures, found in biological systems such as beetle carapaces and widely used in aerospace, civil, and mechanical engineering, achieve remarkable strength-to-mass ratio given their slenderness and curved geometries. However,…
Non-cubic crystals exhibit anisotropic physical and functional properties. Microscopic crystallites as constituents of polycrystalline materials are randomly oriented, thus polycrystalline ceramics lack the anisotropic properties of their…
Therapeutic ultrasound for brain stimulation has increased in the last years. This energy has shown promising results for treating Alzheimers disease, Parkinsons disease, and traumatic brain injury, among other conditions. However, the…
In this study, a preparation route of Co-Cu alloys with soft magnetic properties by high-pressure torsion deformation is introduced. Nanocrystalline, supersaturated single-phase microstructures are obtained after deformation of Co-Cu…
A large body of experimental work on the microstructure and dynamics of simplifiedindustrial nanocomposites made of disordered silica filler in a styrene-butadiene matrixby solid-phase mixing is regrouped and critically discussed in this…
Mycelium-bound composites are promising materials for sustainable packaging, insulation, fashion, and architecture. However, moulding is the main fabrication process explored to date, strongly limiting the ability to design the complex…
A 3-D porous apatite scaffold (B-HA), recently obtained through biomorphic transformation of a natural wood, is investigated on its multi-scale porous structure determining superior mechanical properties and biological behaviour. B-HA shows…