Related papers: Boiling transitions during droplet contact on supe…
In this study, using direct digital and infrared imaging techniques, the freezing of up to three simultaneous THF hydrate droplets was investigated for the first time. Nucleation was initiated at the aqueous solution-air interface. Two…
Nanoscale topographic features of solid surfaces can induce complex metastable behavior in colloidal and multiphase systems. Recent studies on single microparticle adsorption at liquid interfaces have reported a crossover from fast…
Ambient air cushions the impact of drops on solid substrates, an effect usually revealed by the entrainment of a bubble, trapped as the air squeezed under the drop drains and liquid-solid contact occurs. The presence of air becomes evident…
The elastic Leidenfrost effect occurs when a vaporizable soft solid is lowered onto a hot surface. Evaporative flow couples to elastic deformation, giving spontaneous bouncing or steady-state floating. The effect embodies an unexplored…
Solid and liquid sodium combustion with liquid water occurs through a thin gas layer where exothermic reactions happen with sodium and water vapors. It thus involves multiple interfaces separating liquid and gas in the presence of surface…
Drops of water at room temperature were released in hot oil, which had a temperature higher than that of the boiling point of water. Initially, the drop temperature increases slowly mainly due to heat transfer diffusion; convective heat…
The mobility of Leidenfrost drop has been exploited for the manipulation of drop motions. In the classical model, the Leidenfrost drop was levitated by a vapor cushion, in the absence of touch to the surface. Here we report a standing…
In this article, the fluid dynamics of room temperature liquid metal (RTLM) droplet impacting onto a pool of the same liquid in ambient air was investigated. A series of experiments were conducted in order to disclose the influence of the…
Recent experiments have shown that liquid Leidenfrost drops levitated by their vapor above a flat hot surface can exhibit symmetry-breaking spontaneous dynamics (A. Bouillant et al., Nature Physics, 14 1188-1192, 2018). Motivated by these…
Although realizing wetting transitions of droplets spontaneously on solid rough surfaces is quite challenging, it is becoming a key research topic in many practical applications which require highly efficient removal of liquid. We report…
In the recent years, there has been a growing interest in droplet-based (digital) microfluidics for which, reliable means of droplet manipulation are required. In this study we demonstrate thermal actuation of droplets on liquid platforms,…
With recent advances in micro- and nanofabrication, superhydrophilic and superhydrophobic surfaces have been developed. The statics and dynamics of fluids on these surfaces have been well characterized. However, few investigations have been…
In this article, we experimentally investigate the impact of a submillimetric water jet on a horizontal surface heated well above the "static" Leidenfrost temperature of water. We observe the transition from a regime where a single drop…
This paper reports the dynamic wetting behavior and heat transfer characteristics for impinging droplets on heated bi-phobic surfaces (superhydrophobic matrix with hydrophobic spots). A non-patterned superhydrophobic and a sticky…
When deposited on a hot bath, volatile drops are observed to stay in levitation: the so-called Leidenfrost effect. Here, we discuss drop dynamics in an inverse Leidenfrost situation where room-temperature drops are deposited on a liquid…
Heat transfer via phase change is a major contributor to heat removal in numerous engineering applications. Thin films of liquid result in increased heat transfer due to a reduction of conduction resistance, in addition the pressure jump at…
The impact of a jet of droplets upon surfaces of varying hydrophobicity is studied via high-speed imaging. Microstructures on silicone surfaces consisting of cylindrical pillars of varying sizes and spacings are utilized to enhance…
We consider the problem of boiling of the direct contact of two immiscible liquids. An intense vapour formation at such a direct contact is possible below the bulk boiling points of both components, meaning an effective decrease of the…
Boiling is the out-of-equilibrium transition which occurs when a liquid is heated above its vaporization temperature. At the nanoscale, boiling may be triggered by irradiated nanoparticles immersed in water or nanocomposite surfaces and…
There hardly is a fluid mechanics phenomenon attracting more attention than the impact of a droplet, due to its undeniable beauty, many applications and the numerous challenges it poses. One of the crucial factors turns out to be the…