Related papers: MMC-Based Distributed Maximum Power Point Tracking…
Modern power systems are characterized by low inertia and fast voltage dynamics due to the increase of sources connecting via power electronics and the removal of large traditional thermal generators. Power electronics are commonly equipped…
This paper presents a new model-free control (MFC) mechanism that enables the local distribution level circuit consumption of the photovoltaic (PV) generation by local building loads, in particular, distributed heating, ventilation and air…
Solar photovoltaic systems are increasing in size and number on the grid. In regions with high penetration, such as California, PV systems serve multiple functions, including peak shaving and demand response. Therefore, the criticality of…
Temperature control in solar collectors is a nonlinear problem: the dynamics of temperature rise vary according to the oil flowing through the collector and to the temperature gradient along the collector area. In this way, this work…
We introduce a novel 3-axis solar tracker water pumping system. The charge generated from solar energy converted by the photovolatic panel (PV) cells is stored in a 12V battery that in turn powers two water diaphragm pumps using a solar…
With the increasing penetration of the roof-top solar PV and the rising interest in net-zero energy homes concept, there is a need of balancing the performance of intelligent controllers, their cost-effectiveness and over-all sophistication…
The application of multilevel converters to renewable energy systems is a growing topic due to their advantages in energy efficiency. Regarding its control, model predictive control (MPC) has become very appealing due to its natural…
Solar micro-inverters are becoming increasingly popular as they are modular, and they posses the capability of extracting maximum available power from the individual photovoltaic (PV) modules of a solar array. For realizing micro-inverters…
Rooftop solar photovoltaic (PV) power generator is a widely used distributed energy resource (DER) in distribution systems. Currently, the majority of PVs are installed behind-the-meter (BTM), where only customers' net demand is recorded by…
This paper introduces a single-switch high-gain voltage-multiplier coupled quadratic boost converter (HGVM-QBC), developed from the conventional quadratic boost converter (QBC). The proposed topology is designed to achieve higher voltage…
Model predictive control (MPC) has become one of the well-established modern control methods for three-phase inverters with an output LC filter, where a high-quality voltage with low total harmonic distortion (THD) is needed. Although it is…
Use of lighter than air platforms (aerostats and airships) for reconnaissance and surveillance over long periods can be facilitated by generation of power on-board through solar photovoltaic arrays. Attempts to integrate solar photovoltaic…
Modular Multilevel Converter-based High Voltage Direct Current (MMC-HVDC) system is a promising technology for integration of offshore wind farms (OWFs). However, onshore AC faults on MMC-HVDC reduce the power transfer capability of onshore…
A fractional-order (FO) based controller for a grid-connected PV system is presented in this paper. A single phase two-stage grid-connected photovoltaic generator (PVG) is used to test the performance of the FO controller. The main…
This paper considers future distribution networks featuring inverter-interfaced photovoltaic (PV) systems, and addresses the synthesis of feedback controllers that seek real- and reactive-power inverter setpoints corresponding to AC optimal…
This paper develops a power management scheme that jointly optimizes the real power consumption of programmable loads and reactive power outputs of photovoltaic (PV) inverters in distribution networks. The premise is to determine the…
A common configuration for a stand-alone PV power system may consist of three converters: a buck converter for the PV panelto charge the battery, a boost converter for the battery to discharge to the load and one for the load voltage…
A simple step and search control strategy for extracting maximum output power from grid connected Variable Speed Wind Energy Conversion System (VSWECS) is implemented in this work. This system consists of a variable speed wind turbine…
Microgrids offer flexibility in power generation in a way of using multiple renewable energy sources. In the past few years, microgrids become a very active research area in terms of design and control strategies. Most of the microgrids use…
Grid-tied photovoltaic (PV) installations with Distributed Maximum Power Point Tracking (DMPPT) architectures include a DC-DC Module Integrated Converter (MIC) for managing each PV panel, isolating it from the others, reducing the…