Related papers: Tuning of LANSCE 805-MHz High-Energy Linear Accele…
The LANSCE Isotope Production Facility (IPF) utilizes a 100-MeV proton beam with average power of 23 kW for isotope production in the fields of medicine, nuclear physics, national security, environmental science and industry. Typical…
The CLIC study of a high-energy (0.5 - 5 TeV), high-luminosity (1034 - 1035 cm-2 sec-1) e+e- linear collider is presented. Beam acceleration using high frequency (30 GHz) normal-conducting structures operating at high accelerating fields…
Advanced linear accelerator design may use Optical Transition Radiation (OTR) screens to measure beam spot size; for instance, such screens are foreseen in plasma based accelerators (EuPRAXIA@SPARC_LAB) or Compton machines (Gamma Beam…
This paper describes beam energy online measurement of BEPCII linac, presents the calculation formula and some of the results. The method mentioned here measures the beam energy by acquiring beam positions in the horizontal direction with…
The Fermi National Accelerator Laboratory (Fermilab) Linac accepts 750 keV H- ions from the front end and accelerates them to 400 MeV for injection into the Booster rapid cycling synchrotron. Day-to-day drifts in the beam longitudinal…
Energy recovering an electron beam after it has participated in a free-electron laser (FEL) interaction can be quite challenging because of the substantial FEL-induced energy spread and the energy anti-damping that occurs during…
The Proton Improvement Plan - II (PIP-II) injector linac is an 800 MeV superconducting H$^-$ linac, christened Linac2, that will replace the existing 400 MeV injector to the accelerator complex at Fermilab. The higher energy, intensity and…
Particle accelerator beamline optimization is a high-dimensional control problem traditionally requiring significant expert intervention. We present RLABC (Reinforcement Learning for Accelerator Beamline Control), an open-source Python…
Dielectric laser acceleration draws upon nano-fabrication techniques to build photonic structures for high gradient electron acceleration. At the small spatial scales characteristic of these structures conventional accelerator techniques…
Alignment of the ILC main linac will be more critical than for any currently existing accelerators due to its long length and the ultra low emittance required. There are several techniques for measuring the ILC reference network; in this…
The beam energy measurement system is of great importance and profit for both BEPC-II accelerator and BES-III detector. The system is based on measuring the energies of Compton back-scattered photons. Many advanced techniques and precise…
The Fermilab Linac delivers 400MeV, 25mA H$^-$; beam. The longitudinal bunch parameters are reconstructed using a Bunch Shape Monitor (BSM) installed in the middle of the Linac. For that, the bunch length is measured as a function of the…
The Bates Linear Accelerator uses six 4MW 2.856GHz RF transmitters. Phase drifts between the transmitters 12 klystrons of greater than 0.5 degree or any amplitude drifts compromise beam delivery and are a common occurrence. Machine…
Optical properties of components in a linac can be reconstructed from analysis of the orbit response matrix, composed from responses of BPMs to changes in currents of dipole correctors. An efficient way to record such response, discussed in…
The MTA beam line has been specifically designed to facilitate measurements of the Fermilab Linac beam emittance and properties utilizing a long, 10m, element-free straight. Linac beam is extracted downstream of the 400-MeV electrostatic…
Next-generation particle accelerators demand advanced beam-diagnostic capabilities to ensure high performance, operational reliability, and sustainable machine operation. Increasing beam intensities and stored energies make the precise…
We demonstrate the recent designs of Safe Extremum Seeking (Safe ES) on the 1 kilometer-long charged particle accelerator at the Los Alamos Neutron Science Center (LANSCE). Safe ES is a modification of ES which, in addition to minimizing an…
The KEK 8-GeV electron / 3.5-GeV positron linac has been operated with very different beam specifications for downstream rings, KEKB, PF and PF-AR. For the reliable operation among these beam modes intelligent beam switching and beam…
A density perturbation produced in an underdense plasma was used to improve the quality of electron bunches produced in the laser-plasma wakefield acceleration scheme. Quasi-monoenergetic electrons were generated by controlled injection in…
Reliable operation of high-power proton cyclotrons is a critical requirement for Accelerator Driven Systems (ADS) and other large-scale applications. Beam tuning in such machines is traditionally performed manually, a process that can be…