Related papers: Printed high-mobility p-type buffer layers on pero…

In this work we present an alternative to the use of PEDOT:PSS as hole transport and electron blocking layer in organic photodetectors processed by solution. As PEDOT:PSS is known to be sensitive to humidity, oxygen and UV, removing this…

The reversible phase transition between orthorhombic and cubic phases is demonstrated in all-inorganic perovskite CsPbIBr2 grown by a dual-source vapor-deposition method. The phase transition is actuated via heating and moisture exposure.…

One of the critical challenges in enhancing the performance of perovskite solar cells is reducing the density of trap states in the light-absorbing perovskite layer. These trap states lead to increased charge carrier recombination, thus…

CsPbI3 has recently received tremendous attention as a possible absorber of perovskite solar cells (PSCs). However, CsPbI3-based PSCs have yet to achieve the high performance of the hybrid PSCs. In this work, we performed a density…

Perovskite photovoltaics has witnessed an unprecedented increase in power conversion efficiency over the last decade. The choice of transport layers, through which photo-generated electrons and holes are transported to the electrodes, is a…

Whether dispersal of plasmonic nanoparticles (NPs) within a perovskite active layer can increase the efficiency of solar cells is a long-standing question. It is well known that inclusion of metallic NPs in an active layer can boost the…

Engineering the energetics of perovskite photovoltaic devices through the deliberate introduction of dipoles to control the built-in potential of the devices offers the opportunity to enhance their performance without the need to modify the…

Perovskite solar cells (PSCs) based on methylammonium lead iodide (MAPbI3) exhibit remarkable photovoltaic performance, where interface engineering with hole transport layers (HTLs) is crucial for optimizing charge transfer and device…

Fully-textured perovskite/silicon tandem solar cells have emerged as promising candidates for next-generation photovoltaics. The optical functions of full texturing, however, are not yet fully understood. A key challenge is the requirement…

Perovskite-silicon tandem solar cells are currently one of the most investigated concepts to overcome the theoretical limit for the power conversion efficiency of silicon solar cells. For monolithic tandem solar cells the available light…

In pursuit of an all-inorganic non-toxic perovskite solar cell (PSC) with enhanced performance, we have investigated the rhombohedral phase of the germanium-based rubidium halide perovskites RbGeX$_3$ (X = Cl, Br, I). The structural…

Though the common metal electrode-based perovskite solar cells have achieved a power conversion efficiency of >25%, they also play a crucial role in accelerating the degradation of the cells. In this study, we investigated phase transition…

Despite the exceeding 23\% photovoltaic efficiency achieved in organic-inorganic hybrid perovskite solar cells obtaining, the stable materials with desirable band gap are rare and are highly desired. With the aid of first-principles…

Poly(3,4-ethylenedioxythiophene):polystyrenesulfonate (PEDOT:PSS) has been widely used as a hole transport layer in perovskite solar cells (PSCs). However, the high interface defect density and energy level mismatch between PEDOT:PSS and…

This paper presents a non-invasive approach to estimate the layer thicknesses of perovskite solar cells. The thicknesses are predicted by a convolutional neural network that leverages the external quantum efficiency of a perovskite solar…

Four {\pi}-extended phosphoniumfluorene electrolytes ({\pi}-PFEs) are introduced as hole-blocking layers (HBL) in inverted architecture planar perovskite solar cells (PVSCs) with the structure of ITO/PEDOT:PSS/MAPbI3/PCBM/HBL/Ag. The…

Lead poisoning and notorious ambient instability in lead-based halide perovskites pave the way for the exploration of alternative materials for affordable and efficient solar cell fabrication. An important prerequisite to this end is the…

Inorganic cesium lead iodide (CsPbI$_3$) perovskite solar cells (PSCs) have attracted enormous attention due to their excellent thermal stability and optical bandgap (~1.73 eV), well-suited for tandem device applications. However, achieving…

Perovskite solar cells (PSCs) have experienced a remarkable rise in power conversion efficiency (PCE) over the past 15 years, positioning them as a promising alternative or complement to silicon for large-scale photovoltaic deployment.…

[4-(3,6-dimethyl-9H-carbazole-9-yl)butyl]phosphonic acid (Me-4PACz) self-assembled monolayer (SAM) has been employed in perovskite single junction and tandem devices demonstrating high efficiencies. However, a uniform perovskite layer does…