Related papers: Low cost passive pH sensor fabricated on scotch ta…
The experiment of the future electron-positron colliders has unprecedented requirements on the vertex resolution, such as around 3micron single point resolution for the inner most detector layer, with fast readout, and very low…
Position-sensitive-detectors (PSDs) based on lateral photoeffect have been widely used in diverse applications, including optical engineering, aerospace and military fields. With increasing demands in long working distance, low energy…
As robotics advances toward integrating soft structures, anthropomorphic shapes, and complex tasks, soft and highly stretchable mechanotransducers are becoming essential. To reliably measure tactile and proprioceptive data while ensuring…
In this paper, a novel fully 3D, microfluidic-oriented, gel-based, and low-cost highly stretchable resistive sensors have been presented. By the proposed method we are able to measure and discriminate all of the stretch, twist, and pressure…
We demonstrate humidity sensing using a change of electrical resistance of a single- layer chemical vapor deposited (CVD) graphene that is placed on top of a SiO2 layer on a Si wafer. To investigate the selectivity of the sensor towards the…
For optimizing production yield while limiting negative environmental impact, sustainable agriculture benefits greatly from real-time, on-the-spot analysis of soil at low cost. Colorimetric paper sensors are ideal candidates for cheap and…
In this paper, a capacitive flexible tactile sensor was designed to measure the pressure of objects based on MEMS technology. This sensor is a structure of a 4x4 array, with metal Ag as the capacitive electrode, which forms the tactile…
A high-sensitivity LED based photoacoustic NO$_2$ sensor is demonstrated. Sensitive photoacoustic gas sensors based on incoherent light sources are typically limited by background noise and drifts due to a strong signal generated by light…
The paper describes highly-sensitive passive electric potential sensors (EPS) for non-contact detection of multiple biophysical signals, including electrocardiogram (ECG), respiration cycle (RC), and electroencephalogram (EEG). The proposed…
Recent advancements in soft robots, human-machine interfaces, and wearable electronics have led to an increased demand for high-performance soft tactile sensors. Tomographic tactile sensor based on resistive coupling is a novel contact…
A flexible and low-cost device for eddy current non-destructive testing made of off-the-shelf components is described. The proposed system is compact and easy to operate, and it consists of a dual H-bridge stepper motor driver, a coil…
A simple and low cost apparatus has been designed and built to measure the electrical resistivity, ($\rho$), of metal and semiconductors in 300-620 K temperature range. The present design is suitable to do measurement on rectangular bar…
A shapeable planar Hall sensor has been fabricated by lift-off a bilayer structure of NiFe(10 nm)/IrMn (8 nm) grown on a Kapton/PDMS substrate without using a buffer layer. The sensor exhibits a magnetic field sensitivity of 0.74…
As more robots are implemented for contact-rich tasks, tactile sensors are in increasing demand. For many circumstances, the contact is required to be compliant, and soft sensors are in need. This paper introduces a novelly designed soft…
A huge interesting progress in the field of organic electronic materials and devices has been observed in the last decade. However, the understanding of these materials is still a challenge to overcome. Most studies in literature focus on…
Active Pixel Sensor (APS) technology has shown promise for next-generation vertex detectors. This paper discusses the design and testing of two generations of APS chips. Both are arrays of 128 by 128 pixels, each 20 by 20 micro-m. Each…
Active edge p-on-p silicon pixel detectors with thickness of 100 $\mu$m were fabricated on 150 mm Float zone silicon wafers at VTT. By combining measured results and TCAD simulations, a detailed study of electric field distributions and…
Dielectrophoresis is an electric field-based technique for moving neutral particles through a fluid. When used for particle separation, dielectrophoresis has many advantages compared to other methods, providing label-free operation with…
At the Department of Electron Devices a cheap, more or less CMOS process compatible capacitive type RH sensor has been developed. Capacitive sensors are based on dielectric property changes of thin films upon water vapour uptake which…
We report a high performance relative humidity (RH) microsensor by coating a few-layer graphene oxide (GO) flake over a photonic crystal (PC) cavity. Since the GO layer has a high water-activity and interacts with the evanescent cavity mode…