Related papers: Wavelength and Refractive Indices from Interferome…
Uncertainties of refractive and group index in dispersion measurement by spectrally resolved white light interferometry are deeply analyzed. First, the contribution to uncertainty of the different parameters affecting both indices is…
In the first version of this paper (arXiv: 1003.2899v1, 15.03.2010) there is described first, traditional method of measuring the non-zero shift of interference fringe in the Michelson interferometer, operating on the effects of second…
In scanning probe microscopy laser interferometers are usually used for measuring the position of the probe tip with a metrological traceability. As the most of the AFM setups are designed to work under standard atmospheric conditions the…
Far Infrared interferometry is the main diagnostics method for electron density measurements in medium sized tokamaks. The transverse density gradients of plasma produce refractive effect, and the probing radiation does not propagate along…
The five-layer nanorod-mediated surface plasmon sensor with inhomogeneous liquid crystal layer was theoretically investigated. The reflectance as the function of the incident angle was calculated at different voltages applied to the liquid…
Two methods of refractometry in reflected light from optical surface of samples are considered and studied experimentally. Methods are grounded on results of Fresnel theory of concerning light reflectivity at near normal incidence and…
High-accuracy dimensional measurements by laser interferometers require corrections because of diffraction, which makes the effective fringe-period different from the wavelength of a plane (or spherical) wave $\lambda_0$. By using a…
Cathodoluminescence (CL) has evolved into a standard analytical technique in (scanning) transmission electron microscopy. CL utilizes light excited due to the interactions between the electron-beam and the sample. In the present study we…
Thermal noise is expected to be the dominant source of noise in the most sensitive frequency band of second generation ground based gravitational wave detectors. Reshaping the beam to a flatter wider profile which probes more of the mirror…
Long cylinders, such as optical fibers, are some of the most widely used photonic devices. The radius and refractive index of these fibers are therefore fundamentally important parameters in determining their performance. We have developed…
Light-absorbing materials are widely used, and their optical properties are an important factor. Snell's law does not hold in materials that partially absorb light. Hence, the optical path in refraction is calculated from Maxwell's law. We…
The refractive index of novel organosilica (nano/micro)material is determined using two methods. The first method is based on analysis of optical extinction efficiency of organosilica beads versus wavelength, which is obtained by a standard…
We investigate that temperature can be measured by a modified Michelson interferometer, where at least one reflected mirror is replaced by a thermalized sample. Both of two mirrors replaced by the corresponding two thermalized samples can…
We measure the nonlinear refractive index coefficients in N$_2$, O$_2$ and Ar from visible through mid-infrared wavelengths (\lambda = 0.4 - 2.4 {\mu}m). The wavelengths investigated correspond to transparency windows in the atmosphere.…
This paper describes the spherical concave mirror method for measuring the index of refraction of transparent liquids. We derived the refractive index equation using Snell's law and the small-angle approximation. We also verified the…
We develop a novel hyperspectral imaging system using structured illumination in an SLM-based Michelson interferometer. In our design, we use a reflective SLM as a mirror in one of the arms of a Michelson interferometer, and scan the…
We report the results of a recent search for the lowest value of thermal noise that can be achieved in LIGO by changing the shape of mirrors, while fixing the mirror radius and maintaining a low diffractional loss. The result of this…
Open dielectric resonators of different shapes are widely used for the manufacture of microlasers. A precise determination of their resonance frequencies and widths is crucial for their design. Most microlasers have a flat cylindrical…
Liquid xenon particle detectors rely on excellent light collection efficiency for their performance. This depends on the high reflectivity of polytetrafluoroethylene (PTFE) at the xenon scintillation wavelength of 178 nm, but the angular…
We present our results for simultaneous measurement of the refractive indices of gallium arsenide (GaAs) and aluminum gallium arsenide (Al$_\mathrm{x}$Ga$_\mathrm{1-x}$As) from $2.0$ to $7.1\,\mathrm{\mu m}$ ($5000$ to…