Related papers: Ultra-compact reference ULE cavity
Lasers with long coherence time and narrow linewidth are an essential tool for quantum sensors and clocks. Ultrastable cavities and laser systems are now commercially available with fractional frequency instabilities in the mid $10^{-16}$…
We report on a laser locked to a silicon cavity operating continuously at 4 K with $1 \times 10^{-16}$ instability and a median linewidth of 17 mHz at 1542 nm. This is a ten-fold improvement in short-term instability, and a $10^4$…
We achieved a 0.5 Hz optical beat note line width with ~ 0.1 Hz/s frequency drift at 972 nm between two external cavity diode lasers independently stabilized to two vertically mounted Fabry-Perot (FP) reference cavities. Vertical FP…
We develop and demonstrate a compact (less than $6$ mL) portable Fabry-P\'{e}rot optical reference cavity. A laser locked to the cavity is thermal noise limited at $2\times10^{-14}$ fractional frequency stability. Broadband feedback control…
We describe the design, construction, and characterization of a medium-finesse Fabry-P\'erot cavity for simultaneous frequency stabilization of two lasers operating at 960 and 780 nm wavelengths, respectively. The lasers are applied in…
In this letter, we demonstrate a technique of making an ultrastable laser referenced to a multi-cavity, corresponding to a lower thermal noise limit due to the larger equivalent beam size. The multi-cavity consists of several pairs of…
We demonstrate phase and frequency stabilization of a diode laser at the thermal noise limit of a passive optical cavity. The system is compact and exploits a cavity design that reduces vibration sensitivity. The sub-Hz laser is…
Cryogenic ultra-stable lasers have extremely low thermal noise limits and frequency drifts, but they are more seriously affected by vibration noise from cryostats. Main material candidates for cryogenic ultra-stable cavities include silicon…
We present a laser system based on a 48 cm long optical glass resonator. The large size requires a sophisticated thermal control and optimized mounting design. A self balancing mounting was essential to reliably reach sensitivities to…
We report ultra-stable locking of a commercially available extended cavity diode laser to a vibration-insensitive high finesse Fabry-Perot cavity. A servo bandwidth of 2 MHz is demonstrated. The absolute stability of the diode laser after…
We demonstrate an easy to manufacture, 25 mm long ultra-stable optical reference cavity for transportable photonic microwave generation systems. Employing a rigid holding geometry that is first-order insensitive to the squeezing force and a…
With Hg atoms confined in an optical lattice trap in the Lamb-Dicke regime, we obtain a spectral line at 265.6 nm in which the full-width at half-maximum is <15Hz. Here we lock an ultrastable laser to this ultranarrow clock transition and…
The realization of ultra-stable lasers with $10^{-17}$-level frequency stability has enabled a wide range of researches on precision metrology and fundamental science, where cryogenic single-crystalline cavities constitute the heart of such…
Modern experiments in quantum metrology, sensing, and quantum computing require precise control of the state of atoms and molecules, achieved through the use of highly stable lasers and microwave generators with low phase noise. One of the…
We have constructed an apparatus containing a linear ion trap and a high-finesse optical cavity in the ultraviolet spectral range. In our construction, we have avoided all organic materials inside the ultrahigh vacuum chamber. We show that,…
Optical Fabry-Perot cavities are crucial tools for metrology experiments, where they achieve extreme length stability, and for some atomic physics experiments, where tunability to atomic transitions enables atom-light interactions. However,…
We characterize the frequency-sensitivity of a cavity-stabilized laser to inertial forces and temperature fluctuations, and perform real-time feed-forward to correct for these sources of noise. We measure the sensitivity of the cavity to…
Using one arm of the Michelson interferometer and the power recycling mirror of the interferometric gravitational wave detector GEO600, we created a Fabry-Perot cavity with a length of 1200 m. The main purpose of this experiment was to…
Frequency stabilisation of lasers to optical reference cavities is an established method to achieve state-of-the-art stability. The strengths of this method are the high discriminator coefficient of optical cavities, and the low-noise…
Photonic integration offers the potential to bring complex high-performance optical systems to the form factor of a compact semiconductor chip. However, the range of system functions accessible critically depends on the extent to which…