Related papers: Uncooled Microbolometer Arrays for Ground Based As…
A new cryogenic noise calibration source for radio astronomy receivers is presented. Dissipated power is only 4.2 mW, allowing it to be integrated with the cold part of the receiver. Measured long-term stability, sensitivity to bias…
Observations of the Cosmic Microwave Background rely on cryogenic instrumentation with cold detectors, readout, and optics providing the low noise performance and instrumental stability required to make more sensitive measurements. It is…
Millimetre-wave observations represent an important tool for Cosmology studies. The Line Intensity Mapping (LIM) technique has been proposed to map in three dimensions the specific intensity due to line (e.g. [CII], CO) emission, for…
Balloon-borne telescopes present unique thermal design challenges which are a combination of those present for both space and ground telescopes. At altitudes of 35-40 km, convection effects are minimal and difficult to characterize.…
We develop a theoretical model for calibrating the absorption imaging of cold atoms under high magnetic fields. Comparing to zero or low magnetic fields, the efficiency of the absorption imaging becomes lower while it requires an additional…
We present a 20-pc, volume-limited sample of M7-L8 dwarfs created through spectroscopic follow-up of sources selected from the Two Micron All Sky Survey (2MASS) Second Incremental Release Point Source Catalog. In this paper, we present…
In the last decade, imaging polarimeters based on micropolarizer arrays have been developed for use in terrestrial remote sensing and metrology applications. Micropolarizer-based sensors are dramatically smaller and more mechanically robust…
A prototype of a low cost Adaptive Optics (AO) system has been developed at the Instituto de Astrofisica de Andalucia (CSIC) and tested at the 2.2m telescope of the Calar Alto observatory. We present here the status of the project, which…
A proof of concept for high speed near-field imaging with sub-wavelength resolution using SLM is presented. An 8 channel THz detector array antenna with an electrode gap of 100 um and length of 5 mm is fabricated using the commercially…
The inability to efficiently tune the optical properties of waveguiding structures has been one of the major hurdles for the future scalability of integrated photonic systems. In silicon photonics, although dynamic tuning has been achieved…
In digital holography, the coherent scattered light fields can be reconstructed volumetrically. By refocusing the fields to the sample planes, absorption and phase-shift profiles of sparsely distributed samples can be simultaneously…
We have developed a calibration system based on a micro-electromechanical systems (MEMS) mirror that is capable of delivering an optical beam over a wavelength range of 180 -- 2000 nm (0.62 -- 6.89 eV) in a sub-Kelvin environment. This…
A polarimeter has been built for use with the Submillimetre Common-User Bolometer Array (SCUBA), on the James Clerk Maxwell Telescope (JCMT) in Hawaii. SCUBA is the first of a new generation of highly sensitive submillimetre cameras, and…
We describe a simple and compact architecture for generating all optical frequencies required for the laser cooling, state preparation and detection of atoms in an ultracold rubidium-87 experiment from a single 780 nm laser source. In…
We experimentally demonstrate the high-sensitivity optical monitoring of a micro-mechanical resonator and its cooling by active control. Coating a low-loss mirror upon the resonator, we have built an optomechanical sensor based on a very…
We report on microwave optomechanics measurements performed on a nuclear adiabatic demagnetization cryostat, whose temperature is determined by accurate thermometry from below 500$~\mu$K to about 1$~$Kelvin. We describe a method for…
In the field of astrophysics, the faint signal from distant galaxies and other dim cosmological sources at millimeter and submillimeter wavelengths require the use of high-sensitivity experiments. Cryogenics and the use of low-temperature…
A single-seed, module-based compact laser system is demonstrated on a transportable $^{87}\text{Rb}$-based high-precision atomic gravimeter. All the required laser frequencies for the atom interferometry are provided by free-space…
This work builds on the previous introduction [1] of a coupled experimental-computational system devised to fully characterize the thermal behavior of complex 3D submicron electronic devices. The new system replaces the laser-based surface…
We construct an electron optical system to investigate Bragg diffraction (the crystal lattice plane, $10^{-2}$-$10^{-3}$ rad) with the objective lens turned off by adjusting the current in the intermediate lenses. A crossover was located on…