Related papers: Mechanically prepared copper surface in oxidizing …
Copper is a highly promising catalyst for the electrochemical CO$_2$ reduction reaction (CO2RR) since it is the only pure metal that can form highly added-value products such as ethylene and ethanol. Since the CO2RR takes place in aqueous…
The present study deals with oxidation behavior under residual stress of shot-peened plates of "commercially pure" zirconium exposed for 30 min at 650 C. The influence of the shot-peening on a pre-oxidized material is presented. The results…
The interaction between graphene and metals represents an important issue for the large-area preparation of graphene, graphene transfer and the contact quality in graphene devices. We demonstrate a simple method for estimating and…
The effect of temperature in high purity Ar (low oxygen partial pressure) on the oxidation and crystal phase evolution of c-Al0.66Ti0.33N arc-PVD coatings was investigated. High temperature tribology in Ar jet and adhesion behavior of the…
Mechanical exfoliation of a graphite surface with an adhesive nanoasperity is studied under different temperatures ranging from 298 K to 2 K using classical molecular dynamics. Two types of the interlayer interaction are investigated. For a…
Stochastic inhomogeneous oxidation is an inherent characteristic of copper (Cu), often hindering color tuning and bandgap engineering of oxides. Coherent control of the interface between metal and metal oxide remains unresolved. We…
The investigation of the deformation behaviour of intermetallic phases is mostly limited to high temperatures due to their low ductility at ambient temperature. Therefore, within this study, nanoindentation experiments on the Al$_{2}$Cu…
Room temperature ferromagnetic hysteresis is observed in commercial SrTiO$_3$ substrates purchased from a variety of suppliers. It is shown that the ferromagnetic signal comes from the unpolished surfaces. Surface impurity phases cannot be…
Material extrusion is one of the most commonly used approaches within the additive manufacturing processes available. Despite its popularity and related technical advancements, process reliability and quality assurance remain only partially…
In order to investigate the dependence of conditioning and field-holding on temperature, three pairs of copper electrodes underwent high voltage conditioning with direct current (DC) pulses while kept at a single temperature, unique for…
Copper-silver (CuAg) alloys are increasingly explored for applications in high-performance electrical and electronic systems, owing to their unique combination of high electrical and thermal conductivity and enhanced mechanical strength.…
The kinetics for O2 oxidation of individual graphite and graphene platelet nanoparticles (NPs) were studied as a function of temperature (1200 to 2200 K) at varying oxygen partial pressures, using a single nanoparticle mass spectrometry…
We perform a joint experimental-theoretical study of the electrochemical oxidation of CO on copper (Cu) under alkaline conditions. Using cyclic voltammetry on Cu single crystal surfaces, we demonstrate that both Cu terraces and steps show…
Structural properties of the clean Si(001) surface obtained as a result of low-temperature (470--650C) pre-growth annealings of silicon wafers in a molecular-beam epitaxy chamber have been investigated. To decrease the cleaning temperature,…
We present experimental and theoretical results for the surface topography of a plastically deformed metallic (aluminum) block. When a hard spherical body (here a steel-, silica glass- or silicon nitride ball) with a smooth surface is…
Our recent modelling works and corresponding numerical simulations realized to describe the UO2 oxidation processes confirm the theory showing that an applied mechanical strain can strongly affect the local oxygen diffusion in a stressed…
Metal surface cleaning or etching techniques using reactive plasma are emerging as one of the dry processing techniques for surface contaminants with high bond energy, especially for cleaning and decontamination of nuclear components and…
Surface roughness plays a crucial role in the accuracy of indentation experiments used to measure the elastic properties of materials. In this study, we present a computational analysis of how surface roughness, represented explicitly by…
The problem of detecting the ability of some metal oxides as photocatalysts is receiving considerable attention in the world. The studied zinc oxide is considered as one of the most utilized semiconductors, due to its direct band gap of…
The augmented space formalism coupled with the recursion method and a tight-binding linear Muffin-tin orbitals basis has been applied to study the effects of roughness on the properties of (001) surfaces of body-centered cubic Fe and…